Prop For .15 MVVS
01-30-2008 | 12:54 AM
#1
Thread Starter
My Feedback: (11)
Joined: Jul 2003
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
From: Eugene,
OR
Prop For .15 MVVS
What prop would you run on a .15 MVVS with a short pipe for speed
On my combat planes we run 7X3 and get 17000 rpm from an LA15 but thats set up more for pull then speed.
I am thinking about building a plane for the little engine, dont know what yet.
Thank you
On my combat planes we run 7X3 and get 17000 rpm from an LA15 but thats set up more for pull then speed.
I am thinking about building a plane for the little engine, dont know what yet.
Thank you
01-30-2008 | 02:00 PM
#2
My Feedback: (1)
RE: Prop For .15 MVVS
ORIGINAL: haikt
What prop would you run on a .15 MVVS with a short pipe for speed
On my combat planes we run 7X3 and get 17000 rpm from an LA15 but thats set up more for pull then speed.
I am thinking about building a plane for the little engine, dont know what yet.
Thank you
What prop would you run on a .15 MVVS with a short pipe for speed
On my combat planes we run 7X3 and get 17000 rpm from an LA15 but thats set up more for pull then speed.
I am thinking about building a plane for the little engine, dont know what yet.
Thank you
6.5x5.0 6.5x5.5 6.5x6.0 6.5x6.5
http://www.apcprop.com/cgi-bin/store...c=6a&product=+
and these sure look to me like they are in the right range. I don;t know the rpm range the engine/pipe is timed for, but these can always be clipped a bit to bring rpm up if needed.
Supercool props has a few composite props listed that look in the ballpark too:
GY01 Goodyear 6.8 x 4.2 C/F 15 Goodyear
GY02 6.5 x 5 C/F 15
GY03 6.5 x 5.5 C/F 15
6.1 x 5.5 (F2C hub) C/F 15
21 Speed and B T/R 6.6 x 6.5 2-blade C/F 15
21 Speed and B T/R 6.6 x 7 2-blade C/F 15
MJD
