That looks like an old 1.3 FPE engine http://www.fpengines.com/html/company.htm

You can use a sensor for the RCEXL ignition. The old one is epoxied in the hole. You will have to dig it out and glue a new one in with some JB Weld

The connector on the CH is a Deans and the one on the RCEXL is a Futaba. Just patch the wires to make whichever plug you want to use work. The wires are the same.

Get the correct side of your new sensor next to the magnet!

Thanks,
It's interesting that they are still producing this engine. The price seems steep for one of these little guys.[X(]

Rod S

I noticed my images have mysteriously disappeared from post 25. So here they are again. For now I am running it on gas/glow with no ignition.

FR

Thanks

Bumping this to ask a question: how does one do transfer port timing changes to the "R" model 21.2?