Hi Bax.

Ok, here is how I set things up: Model Menu to Cond Select, here I have four conditions, normal, idleup 1, idleup2, idleup3, and hold. I am using normal, idleup1, and idleup2. I have set up rate 1 "AVCS" and rate 2 "norm" on switch GF. I am able to switch between these two rates on any of the above conditions. I have set my gyro to 70% on AVCS and 30% on NORM. All group settings were set to single. In the AVCS mode, I get a solid red light on my 520 gyro and in the NORM mode, I get a solid blue light. I have set up DR on switch SA at 75% and expo at -30% as per the gyro instructions.

Does my above set up sound like what you were describing to me in your post above?

Thanks,

Mike

We don't know what "switch GF" is, but if that switch toggles between conditions, you did what I described. However, if the gyro is doing what you want, then you did it "right". There is no "correct" way to set up the transmitter...if it's doing what you want, then it's "correct".