computer link to 9c
07-10-2004 | 09:59 PM
#1
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Laval,
QC, CANADA
computer link to 9c
i have a futaba 7cap remote and i want to link it to my computer to do some training with fms (so i'd need a joystick interface). can someone help me with a link or something to build myself a cable from the remote to the computer? and any required drivers. thanks
07-13-2004 | 08:51 AM
#2
Joined: Jan 2003
Posts: 3,796
Likes: 0
Received 0 Likes
on
0 Posts
From: Champaign, IL
RE: computer link to 9c
Hi tweety_04_01,
While we are not sure of an interlink for the FMS simulator, you can use the 7C with the Great Planes Simulator, by means of their interlink with USB connector.
You may want to check their site at http://www.realflight.com/index.html
I hope you find this information helpful. You can also reach our Futaba support technical team at 217-398-8970, or via fax at 217-398-7721.
Sincerely,
Krysta
Lead Futaba Customer Service and Programming Technician
While we are not sure of an interlink for the FMS simulator, you can use the 7C with the Great Planes Simulator, by means of their interlink with USB connector.
You may want to check their site at http://www.realflight.com/index.html
I hope you find this information helpful. You can also reach our Futaba support technical team at 217-398-8970, or via fax at 217-398-7721.
Sincerely,
Krysta
Lead Futaba Customer Service and Programming Technician
07-13-2004 | 01:42 PM
#3
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Laval,
QC, CANADA
RE: computer link to 9c
i finally did it by connecting teh 9c to the line-in port of my soundcard and using smartpropo with ppjoy to emulate a proper joystick interface. works perfectly.
