I am in the process of setting up my gasser plane and want to open and close the choke with a servo. I have a 9Z WC2 radio and wasn't real sure how to do this. Any suggestions would be nice.

THANKS

Hi Furyicon,

Are you wanting this on a switch or dial? I am assuming that this choke is just an on/off, if so doing a Pmix from the channel you have this plugged into, with the same channel as slave should work for you. Just select which switch or dial you want this on.

Thanks, Krysta

I put the choke servo on Aux 8 and then went to the function menu to change the control to the left slider. It allows you a partial choke also. To adjust the servo throw to get the choke perfect go to the atv menu.