10CAP Reverse Elev servo using mixing
06-29-2008 | 05:44 PM
#2
RE: 10CAP Reverse Elev servo using mixing
I kept working at it until I found out how to do it.
Go to the Advanced Menu and select Prog. Mix1-8
Select an unused mix. Example: Mix 1
Turn MIX>ON
Turn TRIM>ON
Turn LINK>ON
Set POSI>NULL
Set MASTER>CH2
Set SLAVE>CH6
Set RATE^>-100
Set RATEv>-100
End End
In Basic Menu select >AUX-CH
Set CH6>NULL
End End
Go to the Advanced Menu and select Prog. Mix1-8
Select an unused mix. Example: Mix 1
Turn MIX>ON
Turn TRIM>ON
Turn LINK>ON
Set POSI>NULL
Set MASTER>CH2
Set SLAVE>CH6
Set RATE^>-100
Set RATEv>-100
End End
In Basic Menu select >AUX-CH
Set CH6>NULL
End End
