EVO300 engine.
02-03-2006 | 01:06 PM
#1
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
From: Odense, DENMARK
EVO300 engine.
Just ordred one of those beasts.
EVO engines from www.evo-engines.com or www.forgues-research.com
Gonna be use in a 1/2 scale Christen Eagel. Preliminary equipment(still in planning stage) servoes Hitec 5995Tg(12pcs), plane kit from www.emhw.de, mufflers 2x 105 Krumscheids, 2xhitec HPD-07RH receivers, optical kabels from receiver to servoes, servoes running on 2xlipo, receivers running on 1xlipo, ignition 2xlipo, prop size between 36-40 " 2-blade, fuel cap 60 oz, no smoke system.
Does this sound great or what?
Joen
EVO engines from www.evo-engines.com or www.forgues-research.com
Gonna be use in a 1/2 scale Christen Eagel. Preliminary equipment(still in planning stage) servoes Hitec 5995Tg(12pcs), plane kit from www.emhw.de, mufflers 2x 105 Krumscheids, 2xhitec HPD-07RH receivers, optical kabels from receiver to servoes, servoes running on 2xlipo, receivers running on 1xlipo, ignition 2xlipo, prop size between 36-40 " 2-blade, fuel cap 60 oz, no smoke system.
Does this sound great or what?
Joen
02-03-2006 | 05:27 PM
#3
Thread Starter
Senior Member
Joined: Aug 2005
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
From: Odense, DENMARK
RE: EVO300 engine.
Weight issue, we're not allowed to fly planes over 55lbs at take off, including fuel and smoke, next I work in the enviromental sector for cleaning up oil after a spill 
, with this setup I should be able to keep it at 54-54,5 lbs, by the way the engine will be an version made of magnesium weighing in at 14 lbs
Joen
, with this setup I should be able to keep it at 54-54,5 lbs, by the way the engine will be an version made of magnesium weighing in at 14 lbsJoen
02-04-2006 | 06:09 PM
#5
Senior Member
My Feedback: (7)
Joined: Dec 2001
Posts: 3,453
Likes: 0
Received 0 Likes
on
0 Posts
From: Glen Robertson, ON, CANADA
RE: EVO300 engine.
ORIGINAL: joenella
Just ordred one of those beasts.
EVO engines from www.evo-engines.com or www.forgues-research.com
Gonna be use in a 1/2 scale Christen Eagel. Preliminary equipment(still in planning stage) servoes Hitec 5995Tg(12pcs), plane kit from www.emhw.de, mufflers 2x 105 Krumscheids, 2xhitec HPD-07RH receivers, optical kabels from receiver to servoes, servoes running on 2xlipo, receivers running on 1xlipo, ignition 2xlipo, prop size between 36-40 " 2-blade, fuel cap 60 oz, no smoke system.
Does this sound great or what?
Joen
Just ordred one of those beasts.
EVO engines from www.evo-engines.com or www.forgues-research.com
Gonna be use in a 1/2 scale Christen Eagel. Preliminary equipment(still in planning stage) servoes Hitec 5995Tg(12pcs), plane kit from www.emhw.de, mufflers 2x 105 Krumscheids, 2xhitec HPD-07RH receivers, optical kabels from receiver to servoes, servoes running on 2xlipo, receivers running on 1xlipo, ignition 2xlipo, prop size between 36-40 " 2-blade, fuel cap 60 oz, no smoke system.
Does this sound great or what?
Joen
I can't seem to be able to open the airplane kit's web site, also to whom are wondering, about the optics they are Fiber Optic extensions that I produce.
What a project, modern fighter jets don't have that much thrust to weight ratio. Awesome
Roger
