Bme 44 - Vibration ??
01-14-2003 | 11:31 PM
#1
Thread Starter
My Feedback: (16)
Joined: Feb 2002
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
From: trumann, AR
Bme 44 - Vibration ??
I HAVE A BME 44 THAT REALLY SHAKES -- I HAVE BALANCED PROP AND ALL OF THE USUAL THINGS -- SHOULD I SEND IT TO B AND B TO FIX ( I HAVE USE THEM BEFORE AND KNOW HOW TO FIND THEM ) OR SHOULD I SEND IT TO BME PEOPLE ( DON'T KNOW HOW TO FIND THEM ?? ) --- I BOUGHT THIS OFF OF RCU -- IT WAS USED BUT WAS TOLD IT WAS OK .. ENGINE STARTS FINE ,, IT REALLY SHAKES AT ALL SPEEDS ????? THANKS DENNIS
01-15-2003 | 12:05 AM
#2
My Feedback: (40)
Joined: Dec 2001
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
From: Waynetown,
IN
Bme 44 - Vibration ??
Make sure you are not running it on the rich side. All engines will shake a bit more if they are rich. Pull the plug out and see if it has a nice TAN color. If it is TAN then you are OK, but if it is black it is running rich. Lean conditions would be represented by a white color.
Good Luck,
Good Luck,
