.25 Extra scratch built conversion
01-09-2005 | 04:25 PM
#1
Thread Starter
Joined: Oct 2003
Posts: 235
Likes: 0
Received 1 Like
on
1 Post
From: littleplaceintheboonies,
ON, CANADA
.25 Extra scratch built conversion
Need advice for an electric power system for my .25 glow extra300. Hoping to use an AXI brushless motor and LiPoly batteries. The plane has not flown yet. It is a fun fly/ basic 3D acrobatic design. Need to know what size motor, gearing and prop would make it 3D capable. Help.
01-10-2005 | 12:01 AM
#2
Senior Member
Joined: Aug 2004
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
From: Sebring,
FL
RE: .25 Extra scratch built conversion
GUY
I used a 282010 AXI on mine for a while and then a JETI 30-3 both w3S1P 20C kokams or 10-12 cell 1950 AUP. A good fast plane but verticle is limited. The AXI was too hot under the cowl and used more amps. I am trying a twin gear drive speed 400 w/10 cells. See the thread.
I used a 282010 AXI on mine for a while and then a JETI 30-3 both w3S1P 20C kokams or 10-12 cell 1950 AUP. A good fast plane but verticle is limited. The AXI was too hot under the cowl and used more amps. I am trying a twin gear drive speed 400 w/10 cells. See the thread.
