Two questions
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: frenchtown,
NJ
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Two questions
First- Recently i crashed my plane with a O.S. 46LA and destroyed my plane. Upon further inspection of the engine i found the smallest, smallest bend in the crankshaft up from the point where the threads end on the engine. i have rotated the engine by hand and it rolls smooth as ever. Is this a problem?
P.S. i basically already know the answer ( its a problem) but i am just checking with the vast knolage on rcu to make myself 100% sure.
Question two- Will this http://www3.towerhobbies.com/cgi-bin...&I=LXCH46&P=OW work as a replacement crank?
P.S. i basically already know the answer ( its a problem) but i am just checking with the vast knolage on rcu to make myself 100% sure.
Question two- Will this http://www3.towerhobbies.com/cgi-bin...&I=LXCH46&P=OW work as a replacement crank?
#2
Join Date: Jun 2006
Location: Cincinnati,
OH
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
RE: Two questions
ORIGINAL: panzertank
First- Recently i crashed my plane with a O.S. 46LA and destroyed my plane. Upon further inspection of the engine i found the smallest, smallest bend in the crankshaft up from the point where the threads end on the engine. i have rotated the engine by hand and it rolls smooth as ever. Is this a problem?
P.S. i basically already know the answer ( its a problem) but i am just checking with the vast knolage on rcu to make myself 100% sure.
First- Recently i crashed my plane with a O.S. 46LA and destroyed my plane. Upon further inspection of the engine i found the smallest, smallest bend in the crankshaft up from the point where the threads end on the engine. i have rotated the engine by hand and it rolls smooth as ever. Is this a problem?
P.S. i basically already know the answer ( its a problem) but i am just checking with the vast knolage on rcu to make myself 100% sure.
http://www.rcuniverse.com/forum/m_6948801/tm.htm
ORIGINAL: panzertank
Question two- Will this http://www3.towerhobbies.com/cgi-bin...&I=LXCH46&P=OW work as a replacement crank?
Question two- Will this http://www3.towerhobbies.com/cgi-bin...&I=LXCH46&P=OW work as a replacement crank?