Topflite DC3 parts question
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Dubai, UNITED ARAB EMIRATES
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Topflite DC3 parts question
I am starting the wing centre section of my dc3, and have hit a problem straight away.
Step 4 tells you to glue a 1/8" ply doubler to the back of the firewalls, but where is this doubler?
I cannot find it on the die cut parts list, and in the bag of pre cut parts are two 1/8" balsa rectangles that look correct. are these the parts to use?
there is no parts list for all the loose items supplied with the kit.
I have posted this on other forums, but any help much appreciated.
thanks
Step 4 tells you to glue a 1/8" ply doubler to the back of the firewalls, but where is this doubler?
I cannot find it on the die cut parts list, and in the bag of pre cut parts are two 1/8" balsa rectangles that look correct. are these the parts to use?
there is no parts list for all the loose items supplied with the kit.
I have posted this on other forums, but any help much appreciated.
thanks