Hitec Programmer v1.03
03-28-2005 | 09:18 PM
#1
Thread Starter
My Feedback: (36)
Joined: Jul 2002
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
From: chesterland, OH
Hitec Programmer v1.03
Hi,
I know that the newest servo's are v1.04 and we should not reset the servo. My question is when is the programmer going to be upgraded so all the functions are available for the servos?
Thank you for your time
Jim
I know that the newest servo's are v1.04 and we should not reset the servo. My question is when is the programmer going to be upgraded so all the functions are available for the servos?
Thank you for your time
Jim
03-31-2005 | 12:16 PM
#3
Junior Member
Joined: Sep 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: Mechanicsburg,
PA
RE: Hitec Programmer v1.03
When the update becomes available, will the programmer have to be sent to hitec to receive the update? Is Hitec working on a device that can be hooked up between the programmer and a PC, so that the update could be downloaded from hitec's website and then applied to the programmer?
Seems like it would save time and money if the updates could be downloaded from the website and applied at home. Why is it taking so long to prepare the update?
Seems like it would save time and money if the updates could be downloaded from the website and applied at home. Why is it taking so long to prepare the update?
