hs 81 problems
07-17-2003 | 12:16 AM
#1
Thread Starter
Member
My Feedback: (2)
Joined: Feb 2003
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
From: Tyler, TX,
hs 81 problems
I have a couple of Hs 81's that I changed to metal gears on, when I put the servo arms on at 90* turn on the radio and power to the rx and move the stick up on the radio the servo arm returns to 90, when I move the stick down and back to center the arm moves past 90 and stays there. I have tried it with 2 different receivers a berg and a futaba, and 2 different radios a 9C and a T6xhs. Anybody know what the problem could be?
07-17-2003 | 05:03 PM
#4
Thread Starter
Member
My Feedback: (2)
Joined: Feb 2003
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
From: Tyler, TX,
hs 81 problems
when it moves past 90 it goes to the end of the range of motion but it doesnt seem to return to the same center point as when the stick is moved in the opposite direction.
