DrCheezIt

Thanks everyone for helping me get my savage all ready for some bashing, but first I have some more newb questions. What would be the best body for bashing a savvy 25 , I couldn't careless what it looks like because it will be for pure straight up bashing. I just want the MAXIMUM protection... even though Savages are indestructible.
And my second question is on my brakes. It seems like my savage doesn't have breaks. When I looked up if my savage has brakes it says it does but when I'm running it and I get it rolling and pull the trigger up it just turns off the engine or keeps rolling. Is it sapposed to do that or am I doing somthing wrong or is it the truck. Thanks in advance.
DRCHEEZIT

badboy2

My Feedback: (13)

toughest body i got was the hummer..try adjusting ur idle screw first so that when u hit ur brake it wont shut down,then adjust the brake knob by the throttle brake linkage ..if no results try tightening the screws that holds the brake..

nd_s

Another thing is to put on a center skid plate, it keeps the dirt off the brakes,works wonders

thunderw0lf

They also prevent this from happening.
[link=http://img17.imageshack.us/my.php?image=img06141xb.jpg][/link]

DaveG55

hey thunder, doesn't that stinger spitting oil at the brake mess them up?

bagged97

That stinger hangs well below the brake.

-SomeGuy-

Pro-line makes body's that are 50% thicker than stock.

azzman

I got a proline GMC Sierra (similar to crowd pleaser) and it thicker (like someguy said) and provides extra protection for the head over a standard truck body because of the rear strut tower bulges.

DrCheezIt

thanks badboy thats all it needed.[8D]

thunderw0lf

Nope, never had a problem with it even before I made a center skid plate for it.