The NEW aeroflyRC10 is here!
11-10-2023, 07:35 AM
#1
The NEW aeroflyRC10 is here!
The aeroflyRC10 is here!
As a download and an upgrade
With 300+ models, 60+ sceneries and great new features, the aeroflyRC10 is available as a download and as an upgrade for all RC9 users. The aeroflyRC10 is the further development of the aeroflyRC9, and yet in many aspects a completely new aeroflyRC. Right down to a new, clear menu navigation, which simplifies all settings, the calibration of the control unit and a quick adjustment of the flight conditions in a modern design.
IKARUS is therefore proud to present the aeroflyRC10 as its new No.1 model flight simulator:
aeroflyRC10 highlights at a glance:
The new aeroflyRC10 is now available in the IKARUS shop as an upgrade from the RC9 and as a download.
Download-Upgrade from RC9 to aeroflyRC10
for only 119,- €
See #D9150 in the shop
Download full version aeroflyRC10
for only 199,- €
See #D9200 in the shop
The IKARUS-RC Flight Controller and all current IKARUS interfaces can still be used!
The DVD version of the aeroflyRC10, the complete sets with accessories and a version for macOS will follow shortly.
Your IKARUS Team
www.ikarus.net
As a download and an upgrade
With 300+ models, 60+ sceneries and great new features, the aeroflyRC10 is available as a download and as an upgrade for all RC9 users. The aeroflyRC10 is the further development of the aeroflyRC9, and yet in many aspects a completely new aeroflyRC. Right down to a new, clear menu navigation, which simplifies all settings, the calibration of the control unit and a quick adjustment of the flight conditions in a modern design.
IKARUS is therefore proud to present the aeroflyRC10 as its new No.1 model flight simulator:
aeroflyRC10 highlights at a glance:
- Night flight in illuminated 4D scenes
- Actively illuminated fixed-wing models and helicopters
- Models with skis for ski flying
- Winter scene for ski flying
- Over 30 new models compared to theRC9
- Over 100 completely new sounds
- Electric and combustion drive selectable for many models
- 4D indoor swimming pool and basketball arena scenery
- Old-timer FES gliders
- Simple menu navigation also in English
- Quick menu for all important settings.
- Fly in VR mode!
The new aeroflyRC10 is now available in the IKARUS shop as an upgrade from the RC9 and as a download.
Download-Upgrade from RC9 to aeroflyRC10
for only 119,- €
See #D9150 in the shop
Download full version aeroflyRC10
for only 199,- €
See #D9200 in the shop
The IKARUS-RC Flight Controller and all current IKARUS interfaces can still be used!
The DVD version of the aeroflyRC10, the complete sets with accessories and a version for macOS will follow shortly.
Your IKARUS Team
www.ikarus.net
Last edited by rajul; 11-10-2023 at 07:38 AM.
12-23-2023, 08:51 PM
#2
Here are some VR startup instructions for Oculus VR:
1) Under the audio settings in PC, check the sound output device is Oculus headphones.
2) Connect your Ikarus RC Simcontroller to the PC and switch on your radio.
3) Boot up the Meta Quest headset.
4) Launch Oculus client software in PC. In the main menu under "devices", check that the Quest headset is connected. If it is not connected, go to "settings", then "beta", and restart Oculus. Then check again that the headset is connected.
5) Put on Quest headset. In the virtual menu, select "quick settings", then "Quest link", then launch air link. Confirm your boundary. Then temporarily remove headset.
6) In PC, double click on the icon "aeroflyRC10 (start in VR mode)", then select "fly". You should see VR mode active status displayed. Please note that after the first launch through your PC, the next launch of RC10 can be done directly from the virtual menu in the Quest headset.
1) Under the audio settings in PC, check the sound output device is Oculus headphones.
2) Connect your Ikarus RC Simcontroller to the PC and switch on your radio.
3) Boot up the Meta Quest headset.
4) Launch Oculus client software in PC. In the main menu under "devices", check that the Quest headset is connected. If it is not connected, go to "settings", then "beta", and restart Oculus. Then check again that the headset is connected.
5) Put on Quest headset. In the virtual menu, select "quick settings", then "Quest link", then launch air link. Confirm your boundary. Then temporarily remove headset.
6) In PC, double click on the icon "aeroflyRC10 (start in VR mode)", then select "fly". You should see VR mode active status displayed. Please note that after the first launch through your PC, the next launch of RC10 can be done directly from the virtual menu in the Quest headset.
Last edited by rajul; 12-23-2023 at 09:26 PM.
