AFP eclipse to 9303 no control
#1
Thread Starter
Member
My Feedback: (33)
Joined: Mar 2003
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
From: San Diego,
CA
I recently sold my Eclipse radio in favor of a JR 9303. When I plug the 9303 in I have to remove the adapter and plug the cable into the JR stereo jack. AFP recognizes that there is a controller connected but when I go to fly...nothing. None of the controls respond to input.
Any Suggestions?
Any Suggestions?
#2
Senior Member
Joined: Aug 2003
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
From: Fresno,
CA
Ok, so it recognizes it in the control pannel right? If so thats good, all you need to do is assign the channels in afp. If nothing moves then you need to go to the control pannel, game controllers, then find it and get the window open. I am not sure what exact settings your transmitter needs but this is where you tell it what you want it to do. For me I have to do this . "Then you should see in controllers, USB ADAPTOR, the stats should say OK. Now you need to click on properties, then click on the settings tab and click calibrate. Now you have to go in order by doing what it says but you have to go in order first with the throttle, then elevator, then the rudder. Next, this is the most important; click on reset to default." I made a post saying how to use the game commander. Maybe this will work for your transmitter too....?
Hope this helps,
Matt
Hope this helps,
Matt



