Model won't stop diving, upright or inverted
12-07-2007 | 10:46 AM
#1
Thread Starter
Joined: Apr 2004
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
From: North, UNITED KINGDOM
Model won't stop diving, upright or inverted
I posted this problem in the general sim forum without success.
My Adrenaline 120 on the A.F.P.D. Extras disk always dives slightly whether upright or inverted.
ALL OTHER MODELS ARE OK so please don't suggest general changes like re-calibrating.
I have not made any changes to the model since the install.
thanks in advance piroflip
My Adrenaline 120 on the A.F.P.D. Extras disk always dives slightly whether upright or inverted.
ALL OTHER MODELS ARE OK so please don't suggest general changes like re-calibrating.
I have not made any changes to the model since the install.
thanks in advance piroflip
12-11-2007 | 11:40 PM
#2
Moderator
My Feedback: (58)
RE: Model won't stop diving, upright or inverted
Hi piro, I have requested the developer in IPACS to make some modifications to the tmd file of the Adrenaline 120 for you. If you could send me your email address, I will send you the tmd file. Just replace the tmd file in the Adrenaline 120 aircraft folder with this one and let me know how if there's any improvement to the flight characteristic.
