JR RG831B receiver
07-23-2014, 07:22 PM
#1
Thread Starter
Join Date: Oct 2002
Location: Timboon, Victoria, AUSTRALIA
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
JR RG831B receiver
Gday to all.
I have a RG831B 8 channel receiver. I recently noticed that the Voltage telemetry on my radio was not working but all other functions were.
I had a look at the receiver and noticed that the LED on the satellite was not working, so I bought a new satellite.
I installed the new satellite and everthing is fine.
I also thought I would rebind with the faulty satellite and noticed that the LED would light up during the binding process but be off once it bound.
Question. - If I'm not worried about the telemetery should I still use this Satellite?
- Any ideas why it should be lite during binding but not once it has bound?
Many thanks
PRBOZ
I have a RG831B 8 channel receiver. I recently noticed that the Voltage telemetry on my radio was not working but all other functions were.
I had a look at the receiver and noticed that the LED on the satellite was not working, so I bought a new satellite.
I installed the new satellite and everthing is fine.
I also thought I would rebind with the faulty satellite and noticed that the LED would light up during the binding process but be off once it bound.
Question. - If I'm not worried about the telemetery should I still use this Satellite?
- Any ideas why it should be lite during binding but not once it has bound?
Many thanks
PRBOZ
