XP 8103 Mixing
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location:
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
XP 8103 Mixing
Danny - I am having trouble mixing chl 1 (throttle master), to
chl 6 (glow driver slave). I get so far along, and cannot finish.
Should I read something more carefully ?
Using Expert glow driver from Horizon. I need the slave to come on at 25% power. Thanks, this is second post, as I saw the RC manufacturer's forum after posting. Thanks for this service !
chl 6 (glow driver slave). I get so far along, and cannot finish.
Should I read something more carefully ?
Using Expert glow driver from Horizon. I need the slave to come on at 25% power. Thanks, this is second post, as I saw the RC manufacturer's forum after posting. Thanks for this service !
#2
XP 8103 Mixing
Set up the mix, in mix 1 or 2. Set it throttle to flap. Set the first 2 values to 0, and then have it move up from there. This should get it to working. If you have any further questions about this, give one of our techs a call at 877-504-0233 and we should be able to help you out.