HELPPPPPPPPPP CG for a dragonlady stick built
04-06-2004 | 08:28 AM
#1
Thread Starter
Member
Joined: Jul 2002
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
From: St. Albert,
AB, CANADA
HELPPPPPPPPPP CG for a dragonlady stick built
I have Aquired a Dragon Lady that was a Stck built and have no Idea what the recomended surface throws were or what the CG measurment was. I did the Caculation but I would also like to see what the original kit had to say
Thanks
Pat
Thanks
Pat
07-06-2004 | 02:32 PM
#2
Junior Member
Joined: Sep 2003
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: Landskrona, SWEDEN
RE: HELPPPPPPPPPP CG for a dragonlady stick built
Pat
If your Dragonlady is 60-90 size ( 66 " span) the setting are:
CG: 4 - 4,25" from leading edge, or 102 - 108 mm.
Aileron: 9 mm up and 7 mm down.
Elevator: 13 mm each way.
Rudder: 40 mm each way.
I am flying mine with a ASP 120four stroke and this is great.
Roy Persson
Sweden
If your Dragonlady is 60-90 size ( 66 " span) the setting are:
CG: 4 - 4,25" from leading edge, or 102 - 108 mm.
Aileron: 9 mm up and 7 mm down.
Elevator: 13 mm each way.
Rudder: 40 mm each way.
I am flying mine with a ASP 120four stroke and this is great.
Roy Persson
Sweden
