Boosted Y Harness ?
05-12-2003 | 01:32 PM
#1
Thread Starter
Member
My Feedback: (1)
Joined: Feb 2003
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
From: Wichita, KS,
Boosted Y Harness ?
Building a 40 size plane and installing servos in wing for each aileron. Using standard JR servos and 4.8 volt pack. Y harness will plug into servos with no extensions. This is not a 3d plane so ailerons are not large. Do i need a Y harness with a booster or will the standard Y harness work?
Thanks
Steve
Thanks
Steve
05-12-2003 | 03:39 PM
#3
Senior Member
My Feedback: (5)
Joined: Dec 2001
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
From: Dun Rovin Ranch,
WY
Depends on Radio
It depends on what radio you are using. If you are using the older Z-PCM then you need a buffered Y-connector. If you are using the newer S-PCM then a standard Y-connector is okay. If you are using standard FM then a standard Y-connector is fine.
