Lanier Monster Stinger
10-28-2009 | 05:55 AM
#2
Senior Member
Joined: Oct 2005
Posts: 2,924
Likes: 0
Received 0 Likes
on
0 Posts
From: PerthWA, AUSTRALIA
RE: Lanier Monster Stinger
YES
don't do anything with it - it might bite you - send it to me and I will dispose of it for you
Ok - Yes, I have had a couple of them - GREAT fun fliers. They will fly with pretty much any engine from 26cc to 62cc. I think I read somewhere once that they were aimed at G38's for an engine but I preferred around 50cc plus in mine. Not the most accurate plane, not the most perfect 3d'er but a really good fun plane to have.
don't do anything with it - it might bite you - send it to me and I will dispose of it for you
Ok - Yes, I have had a couple of them - GREAT fun fliers. They will fly with pretty much any engine from 26cc to 62cc. I think I read somewhere once that they were aimed at G38's for an engine but I preferred around 50cc plus in mine. Not the most accurate plane, not the most perfect 3d'er but a really good fun plane to have.
10-28-2009 | 10:58 AM
#3
Thread Starter
Junior Member
My Feedback: (6)
Joined: Sep 2009
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
From: Tinley Park, IL
RE: Lanier Monster Stinger
the Stinger i have is for the 100 cc size motor or larger,
i also the smaller stinger which i fly with a Zenoah G62
i wanted to know if anyone built the larger one that requires 8 servos in the tail 4 for the rudder and 4 for the elevators
i wanted to see if anyone had modified it to work with larger high torqe servos
and this kit is a one of kind, they only made so many and i have the complete kit.
i also the smaller stinger which i fly with a Zenoah G62
i wanted to know if anyone built the larger one that requires 8 servos in the tail 4 for the rudder and 4 for the elevators
i wanted to see if anyone had modified it to work with larger high torqe servos
and this kit is a one of kind, they only made so many and i have the complete kit.
