Can anyone tell me how to measure the side thrust on the engine installation.
Mine calls for 2 degrees, but I don't know how to set it up.
Thanks,
Sidekick

Check out this other thread. The technique is the same whether you are measuring left / right or up / down thrust ...

[link=http://www.rcuniverse.com/forum/m_9798859/tm.htm] Tips and Techniques thread  [/link]<br type="_moz"/>

Easiest way is using an incidence meter:

http://www.robart.com/how_to/incidence_meter.aspx

If you don't have one, check this old thread:

http://www.rcuniverse.com/forum/m_85...tm.htm#8510245

Easiest way for me is to look at the end of the prop shaft,if it's say 4mm that's the down and side thrust set