RE: Der Jager 1/3 scale
 

here are some pics of the fuse ready for prime , wings are not coverd yet

RE: Der Jager 1/3 scale
 

Nice work Lazyace! Its great to see this beautiful plane continuing its legacy I look forward to seeing your completed masterpiece! Happy flying gents..

Cheers!

David

RE: Der Jager 1/3 scale
 

Anyone still working on these builds? Any luck with drawing the cabane struts?

John

RE: Der Jager 1/3 scale
 

almost done

RE: Der Jager 1/3 scale
 

Looks Great! I'm still stuck here in Afghanistan, ordering parts for this build. I did get the landing gear from TNT and a G-62 with a pitts.
Do you have the drawing or measurement for the Cabain struts? I don't have my plans here with me, and I forgot what size wheel and spinner the plans call for.
Just more stuff I can order for this while I'm here.

John

RE: Der Jager 1/3 scale
 

john

they are 5" wheels. it calls for a 5" spinner but used a 4" the 5 looked to big to me, I made the cabanes from the plans . I need a lot of tail wt. with a fuji 50ie up front , g-62 is heavier be carefull .

charlie

RE: Der Jager 1/3 scale
 

Thanks for the wheel and spinner sizes, gives me a chance to order a couple more things. I got a pretty good deal on the G-62, but I also picked up a NIB BME 50. I may use that instead of the Zenoah if weight up front is an issue.
Any other pics from your build during construction stage?

RE: Der Jager 1/3 scale
 

This uis one of my favorite designs. You are douing nuice work, too.

RE: Der Jager 1/3 scale
 

I would use the BME 50 , is it ei or magnito ?

RE: Der Jager 1/3 scale
 

Lazyace,
WOW, this is one NICEbuild you got there - enjoy ithttp://www.rcuniverse.com/forum/js/f.../thumbs_up.gif

Cheers

Bundu

RE: Der Jager 1/3 scale
 

The BME has Electronic ignition and a pitts came with it.
I don't have the plans here with me, so I cant see how it will all lay out. But I still have plenty of time to order all the extra stuff I'll need.
Speaking of stuff I'll need.... This will be my first build of a plane this size. What size servos are you using in your build? What torque on the elevator, rudder and ailerons?
John

RE: Der Jager 1/3 scale
 

ohn

I've got hitec 645's on all 133 oz on 6 volts , I don't do 3d just some mild aerobatics .

RE: Der Jager 1/3 scale
 

That’s quite a bit of torque.... Do you think something around the 74-80 oz would work, or am I just looking for trouble on the elevator? Not arguing, just asking.

Looks like I'll be getting new servos too...! :)

RE: Der Jager 1/3 scale
 

I would not go below 90 on the elev , just my 2cts , the 645's are 107 on 4.8 volts

RE: Der Jager 1/3 scale
 

Thanks for the insight on the Hitec servos Charlie.
Question about the area aft of the Turtle Deck, between the vertical and horizontal. Did you fiberglass this fairing, or is this just fabric?
John

RE: Der Jager 1/3 scale
 

I carved it out of balsa and covered it with cloth

RE: Der Jager 1/3 scale
 

Hay Charlie. Did you ever fly the Der Jager?

RE: Der Jager 1/3 scale
 

yes got 6 or 7 flights on her with a fuji 50ei , fly's good

I have a full kit for sale on RCU. Anyone interested. Kit is in great shape. Comes in 2 boxes so expect shipping in the range of $30-$40!

I just bought the short kit and a set of plans from Balsa USA, anyone have a list of wood needed to complete the kit?

thanks