Manuals for Nitromodels
03-09-2009 | 10:15 PM
#26
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
The CG is 85 to 95mm from leading edge.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: DemonDean
Thanks John for the reply to my eariler request. It however is not one I really need.
I need the larger version. This is the one http://www.quickworldwide.com/manuals/Giles202_67.pdf
Looking really for the CG point.
Thanks......Dean
Thanks John for the reply to my eariler request. It however is not one I really need.
I need the larger version. This is the one http://www.quickworldwide.com/manuals/Giles202_67.pdf
Looking really for the CG point.
Thanks......Dean
03-10-2009 | 05:56 AM
#27
RE: Manuals for Nitromodels
Good Morning
How about the manual for the http://www.nitroplanes.com/yeul4643arfn.html. Please note that the upper wing does NOT attach to the fuse as shown in the picture on the model you sent me...... The brackets do not attach to the sides, they go thru the fuse
Thank you
Hoss
[email protected]
How about the manual for the http://www.nitroplanes.com/yeul4643arfn.html. Please note that the upper wing does NOT attach to the fuse as shown in the picture on the model you sent me...... The brackets do not attach to the sides, they go thru the fuse
Thank you
Hoss
[email protected]
03-10-2009 | 11:05 AM
#29
Junior Member
Joined: Oct 2004
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
From: , MD
RE: Manuals for Nitromodels
I have a 50cc 2.2M Nitro Models Giant Scale Yak 54 3D ARF 81, Item: 90A183W that I bought on Black Friday. The manual included with this plane doesn't match the plane. I really don't need the manual except for balance point, Engine mounting, and suggested control throws. Can you please provide the correct manual or this information above.
Thanks
Steve
Thanks
Steve
03-10-2009 | 12:46 PM
#30
Junior Member
Joined: Mar 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: , NJ
RE: Manuals for Nitromodels
Hey John, if I could get the manual for the Exceed F-35 [link]http://www.nitroplanes.com/frarecoedfrc.html[/link] I'd really appreciate it.
[email protected]
the order # was: 535194 if that helps. thanx!
[email protected]
the order # was: 535194 if that helps. thanx!
03-11-2009 | 08:31 PM
#31
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
Thanks for pointing this out.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: Lil Hoss
Good Morning
How about the manual for the http://www.nitroplanes.com/yeul4643arfn.html. Please note that the upper wing does NOT attach to the fuse as shown in the picture on the model you sent me...... The brackets do not attach to the sides, they go thru the fuse
Thank you
Hoss
[email protected]
Good Morning
How about the manual for the http://www.nitroplanes.com/yeul4643arfn.html. Please note that the upper wing does NOT attach to the fuse as shown in the picture on the model you sent me...... The brackets do not attach to the sides, they go thru the fuse
Thank you
Hoss
[email protected]
03-11-2009 | 08:36 PM
#32
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
Manual sent.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: crashcraig
Thanks, my order number is 535934. I did get a reply back from Customer Support that someone would contact me as well.
Thanks, my order number is 535934. I did get a reply back from Customer Support that someone would contact me as well.
03-11-2009 | 08:38 PM
#33
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
sure what's your order number? I got a updated manual and see if the new manual will work for you.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: ssnyder
I have a 50cc 2.2M Nitro Models Giant Scale Yak 54 3D ARF 81, Item: 90A183W that I bought on Black Friday. The manual included with this plane doesn't match the plane. I really don't need the manual except for balance point, Engine mounting, and suggested control throws. Can you please provide the correct manual or this information above.
Thanks
Steve
I have a 50cc 2.2M Nitro Models Giant Scale Yak 54 3D ARF 81, Item: 90A183W that I bought on Black Friday. The manual included with this plane doesn't match the plane. I really don't need the manual except for balance point, Engine mounting, and suggested control throws. Can you please provide the correct manual or this information above.
Thanks
Steve
03-11-2009 | 09:04 PM
#34
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
Alright will send you a new manual.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: well behaved viking
Hey John, if I could get the manual for the Exceed F-35 [link]http://www.nitroplanes.com/frarecoedfrc.html[/link] I'd really appreciate it.
[email protected]
the order # was: 535194 if that helps. thanx!
Hey John, if I could get the manual for the Exceed F-35 [link]http://www.nitroplanes.com/frarecoedfrc.html[/link] I'd really appreciate it.
[email protected]
the order # was: 535194 if that helps. thanx!
03-12-2009 | 04:30 AM
#36
Junior Member
Joined: Feb 2007
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Reisterstown,
MD
RE: Manuals for Nitromodels
John,
I bought a 71" yak54 at a swap meet, I looked like the kit had never been disturbed,, heck it took me a week to get the plans unrolled
. It had no manual, I was guessing the plans were all it came with. Is there a manual avail for it? How do I get it?
Thanks,
Tom
[email protected]
I bought a 71" yak54 at a swap meet, I looked like the kit had never been disturbed,, heck it took me a week to get the plans unrolled
. It had no manual, I was guessing the plans were all it came with. Is there a manual avail for it? How do I get it?Thanks,
Tom
[email protected]
03-12-2009 | 07:56 PM
#37
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
sure can you please pm me you email and the link of the plane you have directly from my website so I can better help you 
John
Nitro Planes
John
Nitro Planes
ORIGINAL: THier
John,
I bought a 71" yak54 at a swap meet, I looked like the kit had never been disturbed,, heck it took me a week to get the plans unrolled. It had no manual, I was guessing the plans were all it came with. Is there a manual avail for it? How do I get it?
Thanks,
Tom
[email protected]
John,
I bought a 71" yak54 at a swap meet, I looked like the kit had never been disturbed,, heck it took me a week to get the plans unrolled
. It had no manual, I was guessing the plans were all it came with. Is there a manual avail for it? How do I get it?Thanks,
Tom
[email protected]
03-14-2009 | 12:51 AM
#38
My Feedback: (1)
RE: Manuals for Nitromodels
Do you have the manual with the reccommended control throws, center of gravity, and reccommended servo size for the CMPRO 70 inch hell cat?
here is the link to the plane: http://www.nitroplanes.com/hellcats.html
here is the link to the plane: http://www.nitroplanes.com/hellcats.html
03-16-2009 | 11:57 PM
#39
Junior Member
My Feedback: (1)
Joined: Mar 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Gold CoastQueensland, AUSTRALIA
RE: Manuals for Nitromodels
Hi John ( Nitro Models )
Also looking for the user manual for the Breitling Cap 232-60R - noted that you had sent one off to Helio Amaral, who I tried to contacct over the net with no response.
Could you please forward copy of manual to;
[email protected]
Cheers Carey
Also looking for the user manual for the Breitling Cap 232-60R - noted that you had sent one off to Helio Amaral, who I tried to contacct over the net with no response.
Could you please forward copy of manual to;
[email protected]
Cheers Carey
03-17-2009 | 09:16 PM
#40
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
see here: http://www.quickworldwide.com/manuals/F6FHellcat.pdf
John
Nitro Planes
John
Nitro Planes
ORIGINAL: I-fly-any-and-all
Do you have the manual with the reccommended control throws, center of gravity, and reccommended servo size for the CMPRO 70 inch hell cat?
here is the link to the plane: http://www.nitroplanes.com/hellcats.html
Do you have the manual with the reccommended control throws, center of gravity, and reccommended servo size for the CMPRO 70 inch hell cat?
here is the link to the plane: http://www.nitroplanes.com/hellcats.html
03-17-2009 | 09:27 PM
#41
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
Manual sent.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: van_gogh
Hi John ( Nitro Models )
Also looking for the user manual for the Breitling Cap 232-60R - noted that you had sent one off to Helio Amaral, who I tried to contacct over the net with no response.
Could you please forward copy of manual to;
[email protected]
Cheers Carey
Hi John ( Nitro Models )
Also looking for the user manual for the Breitling Cap 232-60R - noted that you had sent one off to Helio Amaral, who I tried to contacct over the net with no response.
Could you please forward copy of manual to;
[email protected]
Cheers Carey
03-23-2009 | 10:26 PM
#44
My Feedback: (205)
Joined: Feb 2002
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
From: hillsdale,
MI
RE: Manuals for Nitromodels
John, picked up your Katana 50CC at a local swap meet, but the manual is missing...all I really need is the CG location...I've tried every CG chart and I think I have it about right, but before the maiden I'd like to be sure...I'm at a conservative 5.75" back from the leading edge at the wing root..thanks rlg
03-24-2009 | 09:22 PM
#46
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
the manual says 137mm from leading edge.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: saintcreed
John, picked up your Katana 50CC at a local swap meet, but the manual is missing...all I really need is the CG location...I've tried every CG chart and I think I have it about right, but before the maiden I'd like to be sure...I'm at a conservative 5.75" back from the leading edge at the wing root..thanks rlg
John, picked up your Katana 50CC at a local swap meet, but the manual is missing...all I really need is the CG location...I've tried every CG chart and I think I have it about right, but before the maiden I'd like to be sure...I'm at a conservative 5.75" back from the leading edge at the wing root..thanks rlg
03-24-2009 | 09:23 PM
#47
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
can you please om me which item you have directly from my website?
John
Nitro Planes
John
Nitro Planes
ORIGINAL: CDN-uavpilot
Hello,
I am looking for the recommended cg range and control surface throws for the Extra 330L. Thanks.
Frank
Hello,
I am looking for the recommended cg range and control surface throws for the Extra 330L. Thanks.
Frank
03-25-2009 | 11:31 AM
#48
Junior Member
Joined: Mar 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Niantic , CT
RE: Manuals for Nitromodels
Hi John,
I am building the B25 Mitchell http://www.nitroplanes.com/sibmi5271mut.html that I bought from a friend who decided not to build it but I don't have the manual for it. Could you please send me a manual? Email is [email protected]
Thanks!
I am building the B25 Mitchell http://www.nitroplanes.com/sibmi5271mut.html that I bought from a friend who decided not to build it but I don't have the manual for it. Could you please send me a manual? Email is [email protected]
Thanks!
03-26-2009 | 07:27 AM
#49
Junior Member
My Feedback: (2)
Joined: Apr 2003
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
From: Quebec,
QC, CANADA
RE: Manuals for Nitromodels
Sorry, the cg range and control surface deflections I need are for the Extra 330L 50 - 80" ARF:
http://www.nitroplanes.com/ex335080arfe.html
If you have a manual, please email to [email protected]. Thanks.
http://www.nitroplanes.com/ex335080arfe.html
If you have a manual, please email to [email protected]. Thanks.
03-26-2009 | 06:42 PM
#50
Senior Member
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes
on
0 Posts
From: LA,
CA
RE: Manuals for Nitromodels
Manual sent.
John
Nitro Planes
John
Nitro Planes
ORIGINAL: trainwreck32
Hi John,
I am building the B25 Mitchell http://www.nitroplanes.com/sibmi5271mut.html that I bought from a friend who decided not to build it but I don't have the manual for it. Could you please send me a manual? Email is [email protected]
Thanks!
Hi John,
I am building the B25 Mitchell http://www.nitroplanes.com/sibmi5271mut.html that I bought from a friend who decided not to build it but I don't have the manual for it. Could you please send me a manual? Email is [email protected]
Thanks!
