E-Starter gear
12-09-2004 | 06:44 PM
#1
Thread Starter
Member
Joined: Jul 2004
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
From: Schertz,
TX
E-Starter gear
I want to put the following flight pack into an E-Starter. It came from a previous GWS plane. Does anybody see any problems or items that won't work?
EPS400(D)
IPS 480 ESC
Naro servos
RN6II RX
9.6V-NiMh750 Battery
If this is a good set up, would the slope glider make more sense then the ARF? Maybe having a spare motor is not a bad idea.
Fairly new at building. Any suggestions or ideas would be appreciated.
Rick
EPS400(D)
IPS 480 ESC
Naro servos
RN6II RX
9.6V-NiMh750 Battery
If this is a good set up, would the slope glider make more sense then the ARF? Maybe having a spare motor is not a bad idea.
Fairly new at building. Any suggestions or ideas would be appreciated.
Rick
12-10-2004 | 01:09 AM
#2
Senior Member
RE: E-Starter gear
My Estarter came with D gearing, so you're good to go with that and all the other parts.
The only thing that I've heard complaint about is the battery pack. The 400's tend to be a bit more amp hungry than the 300's and that pack, which I am assuming is a GWS pack, can't deliver a full amp meal for the motor.
There is a thread at rcgroups.com regarding that pack between me, some other flyers and a GWS representative. If you really, really, need the link, I can try to find it for you. Nothing there that I haven't said here, but some people just like to read!
The only thing that I've heard complaint about is the battery pack. The 400's tend to be a bit more amp hungry than the 300's and that pack, which I am assuming is a GWS pack, can't deliver a full amp meal for the motor.
There is a thread at rcgroups.com regarding that pack between me, some other flyers and a GWS representative. If you really, really, need the link, I can try to find it for you. Nothing there that I haven't said here, but some people just like to read!
