jmulder

My Feedback: (6)

Ive got the plans fer the Pen Knife if you want a copy. Ive got a Saito 30 in mine but I think Im gonna stick a 40 2 stroke in it fer kicks.

NavyFlyer

My Feedback: (8)

I found that for me, bringing the plane in from the left or the right, like i'm going to settle in for a landing and keeping enough throttle on it to barely keep it moving, then just bring it down the runway toward me.. Then I get it about 10-15 feet infront of me and pitch it up.. and then just walk it toward me.. then settle into a hover right in front of me and there you go..

I don't know if you guys have "barriers" your not allowed to go past.. My field is a little different as far as all the rules, it's "fairly" laid back.. I love it..

Aerosplat

My Feedback: (12)

Here is my Aces 1 Edge 540 Profile. Read my review of this plane in a new thread I just created in this same forum.

wdratsloper

Here's a picture of my Edge 540 Profile.

jmulder

My Feedback: (6)

is the wing on the edge tapered or is it just the ailerons?

Aerosplat

My Feedback: (12)

The wing LE is straight. The trailing edge is tapered, as well as the ailerons. The wing thickness is constant along the length of the main spars and forward LE radius.

jmulder

My Feedback: (6)

can yall tell me a bit about the IFO MK3? How much $ were they?

Chris 540

My Feedback: (3)

Here is my Morris Topcap w/ Saito 72.....

Hisham

Here is my scratch built Limbo Dancer

HitecRedneck

Heres mine

roy_fisher

what engine do you have on your laser 3d?
how will he fly with an o.s 46 fx?
will he make 3d menuvers?
thank you
roy

thejetman

My Feedback: (1)

This is (or was) my own design plane.
I copied the wing of the uproar 60 and downsized it a little. The rest of the plane I just winged it. It flew great till I made a hesitation in flying one day and flew it straight into the ground at full speed. Not too much left of it.
Keven

RC_Eflyer-RCU

Roy,

Your Question about Hitec Rednecks Laser 3D may not apply. If I'm not mistaken that is the Laser 3D parkflyer version powered by what I'm going to assume is a Speed 300 with a 4.5:1 gearbox, with an AUW of around 14 oz. Its about a 28-30" Span funfly that looks exactly like its bigger brother.

--Paul

Billy Hell

My Feedback: (2)

Hear is my unknown Gee Bee Profile. I call her the Duck because of her markings. Will take off in a body length, loops super tight, rolls almost axial, capable of anything and fits in the trunk of my 76 Eldo Caddy with the top down (and the wing attached). I want more of these things! I love it. The motor is a really old K&B Torpedo .40. Seems to be more than enough at half throttle. Weight is 4.3 lbs. Here is a side view:

Billy Hell

My Feedback: (2)

Here is the heart of the beast:

Billy Hell

My Feedback: (2)

And here is where the Duck gets her name:

bugsiegel

My Feedback: (2)

where is the photo of the Duck in the trunk of the Eldo?
I've once seen an add for that car claiming it to be the family car. The photo showed the car with a loades ski rack on it.
The ski rack ran across the trunck !!

FlyLow-RCU

My Feedback: (5)

Chris 540,

I like your TopCat. What kind of performance do you have with your 4 stroke? I am considering a TopCat and want to know if you would recommend the same motor.

Billy Hell

My Feedback: (2)

At 22 feet long and with the largest production motor made for the street (513 ci = 8 mph) she is no profile plane. I'll get picture of the trunk all loaded up (1 plane, 1 field box, 1 case for radios and chargers). Until then here she is:

Chris 540

My Feedback: (3)

Hey flylow..

I just put the Satio 72 on a few days ago. I have not flown it yet.

I did fly it all summer with a OS 46 FX and tuned pipe and it was incredible.

Wgeffon is the guy who turned me on to this combo. Maybe he can chime in and tell you about the performance. From what I hear it is breathtaking!

bvmjethead

My Feedback: (10)

Where can I get a Hots? I'd like the big one for the Moki 1.9 I have. Does anybody know whos kitting these planes anymore. Laser cut....if I'm lucky.

Scott

John Wells

My Feedback: (10)

Hey BH, surely 513 CID will get ya more than 8 miles per hour! He he ! (I know what you meant but couldn't let that one pass!) That's a cool lookin' one.

John W.

Eam201

Fun Flying made easy! OS SX 32 with pipe.

James Goss

This is my mew disk plane and it is more fun than any fun fly I have had in the past. It has some moves of its own and will hover as good as any plane.

3dkid

My Feedback: (2)

hey guys heres my Magic fun fly i just got it ready to fly it has a Leo .37 pro engine on a macs 1 piece pipe it weighs 4 pounds i hope i can get some weight off of it some time anyways here it is



David


(sorry about the bad pic my digital camera is in the shop so i had to use my webcam)