Good 3d Profile ARF for an os .40
#2
My Feedback: (54)
Join Date: Sep 2002
Location: Williamstown,
PA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Good 3d Profile ARF for an os .40
Not an arf, but that motor would do great in a MS Models Menace. Its a kit, but can be built really fast. I have one in mine with a pipe and it does everything in 3D. Or the magic it would work well in, but thats not profile.
#3
Senior Member
My Feedback: (1)
Join Date: Mar 2002
Location: Salisbury, NC
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Good 3d Profile ARF for an os .40
What kinda OS do you have? FP, LA, or FX? Most ARF profile are going to be a little heavy for a bushing engine to have unlimited verticle. But the Magic, not Magic extra, would be great with one.
#5
Junior Member
Join Date: Jan 2006
Location: soldotna,
AK
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ARF FOR A 40 SIZE ENGINE
Hi Jordon I have been flying a CG 330 Extreme with a 46 it has good vertical knife edges good it weighs 4 1/2 lbs.and it is tough for a ARF... Thanks. Mark,
#7
Senior Member
My Feedback: (1)
Join Date: Jan 2003
Location: RockIsland,
TN
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Good 3d Profile ARF for an os .40
I have a .40 LA in my Magic and it is great ! It has seen service in an uproar , Duraplane, Tower hobbies trainer, etc good engine and very durable.
#8
My Feedback: (8)
Join Date: Jan 2002
Location: Atoka,
TN
Posts: 1,788
Likes: 0
Received 0 Likes
on
0 Posts
Good 3d Profile ARF for an os .40
Originally posted by mpj220
My vote goes for a QHOR.
While not an ARF, it builds faster than an ARF.
I had an OS 40fp sitting around and never thought I could have so much fun with it. I built a QHOR with 24" wingspan - all the other measurments are from the plans.
It may not do all the 3D manuevers but, the tricks it can do can be done at ground level without the worry of breaking it to bits. Flies super in high winds as well.
Mark
My vote goes for a QHOR.
While not an ARF, it builds faster than an ARF.
I had an OS 40fp sitting around and never thought I could have so much fun with it. I built a QHOR with 24" wingspan - all the other measurments are from the plans.
It may not do all the 3D manuevers but, the tricks it can do can be done at ground level without the worry of breaking it to bits. Flies super in high winds as well.
Mark