diff
08-28-2005 | 01:19 PM
#2
Banned
Joined: Feb 2004
Posts: 6,058
Likes: 0
Received 0 Likes
on
0 Posts
From: North of the, , UNITED KINGDOM
RE: diff
Remove the 4 screws that hold the diff plate on and the throttle servo horn, lift off the horn and the whole center diff assembly, then just pull the blocks off with the disks and pads.
BEFORE YOU FIT THEM BACK IN !!!
Slice the bearing blocks HORIZONTALLY across the center of the hole. This will aid the speed and refit times for future repairs.
BEFORE YOU FIT THEM BACK IN !!!
Slice the bearing blocks HORIZONTALLY across the center of the hole. This will aid the speed and refit times for future repairs.
