Official Hyper 8 Thread
#2
Member
Join Date: Nov 2003
Location: norman, OK,
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
Me just this pass weekend
Steve pak: Hyper 8 was on point this weekend. A lot of people thought
the same thing about it when we talked about it.
The acceleration was unreal. It accelerated like it had a rocket pack
on it. Steve and I talked some about it after his first run and he
likes it better than his 777 sp2. It handles like a dream. It jumps
super good and straight. It was very STABLE. It jumped out of the
turns super well.
He ran 441 this weekend.
Arms upper lay down all the in on the tower.
Rear third hole in from the top.
20 deg front hubs
3 rear toe.
Maybe he will post what he has Monday or tues.
I want to run mine, but I was going to save it for this weekend. I was
thinking I would break something, but Steve drove it like he did not
care. Hahah
I’m sorry did I say how TOUGH THE HYPER 8 IS?
Steve drove it like a JUNK YARD PITBULL THAT GOT A HOLD OF THE POST
MAN LEG AND WOULD NOT LET GO! LOL!
That thing is a tank like the old Hyper 7 was, but with more tuning
aids to home in for any track condition that was put in front of it.
I've seen Steve drive before and nothing against Steve, but wow the
HYPER 8 IN STEVE HANDS WAS UNREAL I TELL YOU.
I was 2nd thinking about getting the HYPER 8, but after this weekend
I’m very please that I did what I did and changed over to the HYPER 8.
Next weekend is going to be the first time I will put it on the track.
I can not wait.
I’m about to wet myself. Hahah
Dibs
-----------------------------------------------------
Steve Pak
Thanks dibbs for the props..... ithink?
I didn't think I did too bad for taking a long break from 1/8th scale.
I guess 4th in the A main is alright though. The car felt really stable
and calm. I didn't have the feeling that I had to fight the car or
force it to do what i wanted. All I really had to do was point and
shoot. It hit the lines that I wanted it too, and was very smooth.
I am although not going to say like everyone else that this is the best
car in the world. The only way that i know to describe it is,
Tougher than the H7 in that it does not break shock shafts.
Steering is a lot better than the H7
Tunability is worlds beyond the H7
Definitely an outdoor car...
Easier to work on.
But guys.. a couple of pointers. Although I was told that everything
was already done...please go ahead and recheck all the screws and stuff.
Some screws were loose. Some did not have any threadlock in them.
Like the 4 screws that gold on your center diff plate with brakes.
Those were not thread locked Also the screws that hold on the top of
the servo saver to the front plate were not threadlocked. There are a
few more...but just be smart and go through the whole car.
Here you go dibbs
The Setup was basically stock that i ran with a few changes.
Oil.............. 400 wt mugen oil
Pistons.......... 1.4mm pistons drilled with the #54 bit
Spring........... H8 Blue
Ride height ..... Ride height arms level (8mm preload)
Shock pos........ Upper inner most hole tower/ Inside on Arms
Shock travel..... Full
Ackerman pos..... Middle hole
Sway bar......... Stock 2.5 (0mm preload)
Front Caster..... 20 Degree Hubs
Caster Hole...... Stock
Upper arm pos.... Stock
Front kickup..... Stock
Diff oil......... 4000wt Mugen
Camber........... -1.0 degrees
Toe.............. 0 degrees out per side
Center:
-------
Diff............. 4000wt Mugen
Brakes........... Stock brake disk
Spur Gear........ stock
Clutch Bell...... 13 tooth
Clutch Shoes..... stock heavy clutch shoes.
Clutch Springs... 3 gold
Engine........... SPD MODZ RB S7
Tuned pipe....... stock hyper pipe
Fuel............. Sidewinder
Glow plug........ odonnell plug
Rear:
-----
Oil.............. 400 wt mugen oil
Pistons.......... 1.4 pistons drilled with the #54 bit
Spring........... H8 Blue
Ride height ..... Bones Level (0mm preload spacers)
Shock pos........ Out on arm, Three from inside on tower upper 00(0)00
Rear hub......... Hub 0 Degree setting hub, middle wheel base
Camber link...... Stock (super smooth)
Camber........... -2
Antisquat........ 2 degrees
Toe in........... 3.0 degrees
Diff oil......... 2000wt Mugen
Shock travel..... Limited to length of shock
Sway bar......... Stock 3.0mm (no preload)
Wing position.... Stock
Steve pak: Hyper 8 was on point this weekend. A lot of people thought
the same thing about it when we talked about it.
The acceleration was unreal. It accelerated like it had a rocket pack
on it. Steve and I talked some about it after his first run and he
likes it better than his 777 sp2. It handles like a dream. It jumps
super good and straight. It was very STABLE. It jumped out of the
turns super well.
He ran 441 this weekend.
Arms upper lay down all the in on the tower.
Rear third hole in from the top.
20 deg front hubs
3 rear toe.
Maybe he will post what he has Monday or tues.
I want to run mine, but I was going to save it for this weekend. I was
thinking I would break something, but Steve drove it like he did not
care. Hahah
I’m sorry did I say how TOUGH THE HYPER 8 IS?
Steve drove it like a JUNK YARD PITBULL THAT GOT A HOLD OF THE POST
MAN LEG AND WOULD NOT LET GO! LOL!
That thing is a tank like the old Hyper 7 was, but with more tuning
aids to home in for any track condition that was put in front of it.
I've seen Steve drive before and nothing against Steve, but wow the
HYPER 8 IN STEVE HANDS WAS UNREAL I TELL YOU.
I was 2nd thinking about getting the HYPER 8, but after this weekend
I’m very please that I did what I did and changed over to the HYPER 8.
Next weekend is going to be the first time I will put it on the track.
I can not wait.
I’m about to wet myself. Hahah
Dibs
-----------------------------------------------------
Steve Pak
Thanks dibbs for the props..... ithink?
I didn't think I did too bad for taking a long break from 1/8th scale.
I guess 4th in the A main is alright though. The car felt really stable
and calm. I didn't have the feeling that I had to fight the car or
force it to do what i wanted. All I really had to do was point and
shoot. It hit the lines that I wanted it too, and was very smooth.
I am although not going to say like everyone else that this is the best
car in the world. The only way that i know to describe it is,
Tougher than the H7 in that it does not break shock shafts.
Steering is a lot better than the H7
Tunability is worlds beyond the H7
Definitely an outdoor car...
Easier to work on.
But guys.. a couple of pointers. Although I was told that everything
was already done...please go ahead and recheck all the screws and stuff.
Some screws were loose. Some did not have any threadlock in them.
Like the 4 screws that gold on your center diff plate with brakes.
Those were not thread locked Also the screws that hold on the top of
the servo saver to the front plate were not threadlocked. There are a
few more...but just be smart and go through the whole car.
Here you go dibbs
The Setup was basically stock that i ran with a few changes.
Oil.............. 400 wt mugen oil
Pistons.......... 1.4mm pistons drilled with the #54 bit
Spring........... H8 Blue
Ride height ..... Ride height arms level (8mm preload)
Shock pos........ Upper inner most hole tower/ Inside on Arms
Shock travel..... Full
Ackerman pos..... Middle hole
Sway bar......... Stock 2.5 (0mm preload)
Front Caster..... 20 Degree Hubs
Caster Hole...... Stock
Upper arm pos.... Stock
Front kickup..... Stock
Diff oil......... 4000wt Mugen
Camber........... -1.0 degrees
Toe.............. 0 degrees out per side
Center:
-------
Diff............. 4000wt Mugen
Brakes........... Stock brake disk
Spur Gear........ stock
Clutch Bell...... 13 tooth
Clutch Shoes..... stock heavy clutch shoes.
Clutch Springs... 3 gold
Engine........... SPD MODZ RB S7
Tuned pipe....... stock hyper pipe
Fuel............. Sidewinder
Glow plug........ odonnell plug
Rear:
-----
Oil.............. 400 wt mugen oil
Pistons.......... 1.4 pistons drilled with the #54 bit
Spring........... H8 Blue
Ride height ..... Bones Level (0mm preload spacers)
Shock pos........ Out on arm, Three from inside on tower upper 00(0)00
Rear hub......... Hub 0 Degree setting hub, middle wheel base
Camber link...... Stock (super smooth)
Camber........... -2
Antisquat........ 2 degrees
Toe in........... 3.0 degrees
Diff oil......... 2000wt Mugen
Shock travel..... Limited to length of shock
Sway bar......... Stock 3.0mm (no preload)
Wing position.... Stock
#3
Member
My Feedback: (1)
Join Date: Nov 2004
Location: , WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
I just got mine today.
More Pics: [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5573.JPG]_1_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5575.JPG]_2_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5576.JPG]_3_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5577.JPG]_4_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5578.JPG]_5_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5579.JPG]_6_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5581.JPG]_7_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5582.JPG]_8_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5583.JPG]_9_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5583.JPG]_10_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5584.JPG]_11_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5585.JPG]_12_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5586.JPG]_13_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5587.JPG]_14_[/link]
[sm=cool.gif][sm=cool.gif]
More Pics: [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5573.JPG]_1_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5575.JPG]_2_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5576.JPG]_3_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5577.JPG]_4_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5578.JPG]_5_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5579.JPG]_6_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5581.JPG]_7_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5582.JPG]_8_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5583.JPG]_9_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5583.JPG]_10_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5584.JPG]_11_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5585.JPG]_12_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5586.JPG]_13_[/link] [link=http://www.phatserver.net/temp/Hyper8Pro/DSCN5587.JPG]_14_[/link]
[sm=cool.gif][sm=cool.gif]
#5
Senior Member
Join Date: May 2004
Location: valleyview,
AB, CANADA
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
I got a good look at a couple of hyper 8s theis last weekend at winter nats, Very nice fit and finish.The performance was good as well as it was keeping a decent pace even after breaking the rear wing.
#7
Senior Member
Join Date: Sep 2005
Location: Dead Center,
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
were do I get this here buggy? Ive got about a grand to spend, this looks like a good start. And for a power plant, I like OS, say a 21 in it? What type of engine do you all think?
Ive got the radio figured out, spektrum dx3 system and servos, have that already. Thanks.
Ive got the radio figured out, spektrum dx3 system and servos, have that already. Thanks.
#8
Member
My Feedback: (1)
Join Date: Nov 2004
Location: , WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: SManMTB
Looks very nice. What's the weight?
Looks very nice. What's the weight?
Honestly, I don't know. I don't really have an accurate way of weighing it.
I guess I could take it to work and put it on the US Mail scale thingy
#9
Member
My Feedback: (1)
Join Date: Nov 2004
Location: , WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: nascardad24
were do I get this here buggy? Ive got about a grand to spend, this looks like a good start. And for a power plant, I like OS, say a 21 in it? What type of engine do you all think?
Ive got the radio figured out, spektrum dx3 system and servos, have that already. Thanks.
were do I get this here buggy? Ive got about a grand to spend, this looks like a good start. And for a power plant, I like OS, say a 21 in it? What type of engine do you all think?
Ive got the radio figured out, spektrum dx3 system and servos, have that already. Thanks.
I ordered mine from Tower. Power plant depends (obviously) like if you're planning on racing or not. I'm probably going to toss in a Sportwerks .26, but I don't plan on racing any time soon, otherwise I'd prolly go with a .21
#12
Senior Member
Join Date: Sep 2005
Location: Dead Center,
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
just order it from tower, early march, Im on back order. What should I power this sucker with? I know roar has limits for the stadium trucks, what about buggies? Would this work http://www2.towerhobbies.com/cgi-bin...?&I=LXCSZ7&P=0 ? If so, I'll call tower and have them add that to my order. Thanks.
#13
Member
My Feedback: (1)
Join Date: Nov 2004
Location: , WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: crusher03
thats a good price, but i got mine cheaper
thats a good price, but i got mine cheaper
#14
Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2004
Location: McLeansville,
NC
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
Darn, I paid a little more since it was going to ship fast[>:] I plan on putting a V-spec in it to start, then an RB WS72 x3.
Thanks for the set-up!!! I'll keep you posted.
Thanks for the set-up!!! I'll keep you posted.
#17
Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2004
Location: McLeansville,
NC
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: Klaus448
I just got mine today.
[sm=cool.gif][sm=cool.gif]
I just got mine today.
[sm=cool.gif][sm=cool.gif]
#18
Junior Member
Join Date: Aug 2005
Location: San Diego, CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
Just ordered my H8 today from A main. The MBX5 Prospec is getting old. I wonder how the stock pipe will work with a P7R ? I have heard this is one of the best rough track handlers.
#23
Member
My Feedback: (1)
Join Date: Nov 2004
Location: , WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: Tony LST05
Awsome pics!!! Can you get the front and rear diff out without removing the shock tower. That really bugged me with the Jammin. PLease do a test since you need to change the fluids anyway.
ORIGINAL: Klaus448
I just got mine today.
[sm=cool.gif][sm=cool.gif]
I just got mine today.
[sm=cool.gif][sm=cool.gif]
I'm not positive since I haven't taken them out yet, but just by looking, I would say yes. It looks like there are two screws that go directly from the tower into the diff cases, plus, in order to get the diff out, you would have to go up with it, and the tower is right above it.
#24
Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2004
Location: McLeansville,
NC
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
ORIGINAL: thopper
You do not have to take the shock tower off to get at the jammin diffs. It is only eight screws frt and back and the center is 4.
You do not have to take the shock tower off to get at the jammin diffs. It is only eight screws frt and back and the center is 4.
#25
Senior Member
Join Date: Nov 2004
Location: Fullerton,
CA
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Hyper 8 Thread
I was talking about the buggy not the truggy. I am not sure how the crt comes apart but the cr you do not need to take off the shock tower.