Please Help me !!
#1
Thread Starter
Member
Joined: Mar 2006
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: haydock, UNITED KINGDOM
Hi, today, i did my break in all correct on my smartech buggy, as i came to tunning, the car suddenly revved full, i couldnt stop it or brake or anything, now the arm has snapped and the wheel fell off. Can any1 tell me y it did this, and also were to buy parts
Regards
Chris
Regards
Chris
#2
the batteries probably went in your tx or rx when you were running at full throttle. happened to me before, now i have battery testers on all my cars.
#4
Senior Member
Joined: May 2005
Posts: 2,045
Likes: 0
Received 0 Likes
on
0 Posts
From: Barboursville,
VA
Its because its a smartech. I've had some come in the hobby shop I used to work in that lost signal after 50ft. Nothing wrong with batteries, wiring, or anything in the electronics but the radio just didn't have the range. You get what you paid for.
#5
Senior Member
Joined: Aug 2005
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
From: Muscoda, WI
If you are running Alkaline get rid of them My car did that once with alkaline in them needless to say. First thing to do is get a good reciever pack and not have the proplem again also get a fail safe to be on the save side also.
#6
Thread Starter
Member
Joined: Mar 2006
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: haydock, UNITED KINGDOM
Ahhh, thanks guys, does any1 no were to buy parts?
I have heard stories of the smartech, but i thourght ild give 1 a go 4 my self lol. Now im regeting it [&o]
I have heard stories of the smartech, but i thourght ild give 1 a go 4 my self lol. Now im regeting it [&o]
#7
Senior Member
Joined: Jan 2005
Posts: 1,246
Likes: 0
Received 0 Likes
on
0 Posts
From: Nicosia, CYPRUS
Everytime i go out with my buggy i first turn on the electronics and see how they work.You can tell if the batteries are low from the servos speed and power when turning the wheels or braking(without running the car).Also find a small spring and put it against the carb or servo horn so that it pulls the brakes when the servo is not responding.If you run out of batteries or for some reason the connections fail the spring will pull the servo or carb and stop the runaway.



