THUNDER TIGER EB4 S2 HELP
#1
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: manchester, UNITED KINGDOM
MY THUNDER TIGER EB4 S2 starts fine but then it moves on its own and the car issent ticking over right. could you tell me why
and help me sort it out
THANKS
Or take 2 me on msn on [email protected]
and help me sort it out
THANKS
Or take 2 me on msn on [email protected]
#2
Senior Member
Joined: Feb 2006
Posts: 1,707
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth, AUSTRALIA
Hey dude tried looking fo ya on MSN but ya not there.Anyway can ya perhaps provide a little more detail of what your buggy is doing?
#3
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: manchester, UNITED KINGDOM
my dad turned the high speed neddle from closed 2 1/2 turns.then the low speed 5 3/8 turns on starting the car wanted to go with trottle in neutral, and what looked like unburned fuel coming from exaust.i have already run in from new with no problem, i have not moved the trims on transmitter dont yet no how to this
#4
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: manchester, UNITED KINGDOM
#5
Did you guys get it worked out .... sounds like the buggy is new ... I would check for clutch drag ... might be a broken spring or something simple like that .... happend to me but the flywheel had come loose a little and the clutch shoes where rubbin' on the face of the clutch bell. Does it sound like that might be something to at least look into for starters .. ??
#10
Senior Member
Joined: Sep 2006
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
From: Florence,
KY
Good to see someone else with the thunder tiger on here, I took mine to the track last saturday and it handled very well on the track. If I get a decent motor it could be a definite contender, I bought mine used and the motor is tired.
Hope your get your problem worked out.
Hope your get your problem worked out.



misco its your idle speed setting m8 turn it out so its reving slow if it revs too high it will move on its own
