when i got my hyper 7 tq rtr the throttle servo was doing the opposite of what the trigger was doing. i used the controller to reverse the signal or whatever so it worked properly. i fitted a failsafe and now instead of turning off the throttle when there is no signal it puts the throttle to full. is there a failsafe that has a switch on it to control what it does when there is no signal?

It should have a button or something on it to set it... check your instructions.

i already looked on the one iv got and it only has 2 lights on it and thats it.

iv ordered [link=http://www.modelmaniacsonline.co.uk/products.php?CatID=107&SubCatID=110&ProductID=1891 &Title=MICRO+FAILSAFE%2FLOW+BATTERY+INDICATOR&ManC ode=4401515]this[/link] so i think iv sorted the problem

You must be missing it then. The failsafe is worthless if you can't set it.

i just had one last look before i ordered the new one and i noticed one of the things i though was a light was actually a set button. problem solved. works a treat. thanks for your help