trinity sirio engine help
01-19-2003 | 11:55 PM
#1
Thread Starter
Junior Member
Joined: Jan 2003
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
From: dayton,
OH
trinity sirio engine help
please help i just built a new losi adam drake truck with a new sirio engine and i can't get it started it will run for about 3 seconds and die to get it to do it again i have to take the glow plug out and blow out the fuel and start over have tried everything i know please help
01-20-2003 | 12:26 AM
#2
Senior Member
My Feedback: (2)
Joined: Nov 2002
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
From: Seattle, WA.
trinity sirio engine help
1st welcome to the board! Keep the glowplug 1/2 turn loose and start it. New engines have lots of compression. I don't understand what you are saying? "...to get it to do it again i have to take the glow plug out and blow out the fuel and start over..." Is there too much fuel in the engine, or do you have to re-prime it to get it to run?
01-20-2003 | 01:16 AM
#3
Thread Starter
Junior Member
Joined: Jan 2003
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
From: dayton,
OH
trinity sirio engine help
it wont fire at all it loads up after a long time on the starter box i do not have to re prime it after taking the glow plug out and turning the car over
