do they make these
03-17-2003 | 10:22 PM
#1
Thread Starter
Senior Member
My Feedback: (2)
Joined: Feb 2003
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
From: staten island , NY
do they make these
i posted this in electric on accident
anyone have a link to a compnay that makes something like
http://cgi.ebay.com/ws/eBayISAPI.dll...category=14951
but instead of it having LED display, i want it to have a voltage reading (down to 0.00 ive seen 0.003). one like an ohm meter or even an lcd display. thanks if you know
anyone have a link to a compnay that makes something like
http://cgi.ebay.com/ws/eBayISAPI.dll...category=14951
but instead of it having LED display, i want it to have a voltage reading (down to 0.00 ive seen 0.003). one like an ohm meter or even an lcd display. thanks if you know
03-17-2003 | 11:10 PM
#3
Thread Starter
Senior Member
My Feedback: (2)
Joined: Feb 2003
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
From: staten island , NY
do they make these
ok i fixed it
i want one that has a better read out.....the red-yellow-greeen doesnt give me enough information. i want to pop a battery in there and see a read in digital 0.09 volts .....or on a fully charged battery 1.2 volts.
i want one that has a better read out.....the red-yellow-greeen doesnt give me enough information. i want to pop a battery in there and see a read in digital 0.09 volts .....or on a fully charged battery 1.2 volts.
03-18-2003 | 11:38 AM
#5
Senior Member
My Feedback: (20)
Joined: Jul 2002
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
From: Vandergrift,
PA
You could
Why not get the led display, then if you dont have one, a small digital handheld meter.
I use the handheld as my source, check after every run, but you could leave the led onboard, and use the handheld to verify once in a while. Try to mount the led with vibration in mind...
Hope it helps
I use the handheld as my source, check after every run, but you could leave the led onboard, and use the handheld to verify once in a while. Try to mount the led with vibration in mind...
Hope it helps
03-18-2003 | 08:33 PM
#7
Member
Joined: Feb 2003
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
From: Dallas, TX
do they make these
My friends and I just use a multimeter to test individual batteries, and also the output from the leads on packs. It's not this model, but this is the idea of what i'm looking at.
http://www.radioshack.com/product.as...DB6FA3713323CC
If you just go to radioshack and tell them what you're looking for, they should be able to help you find one that'll do what you want.
http://www.radioshack.com/product.as...DB6FA3713323CC
If you just go to radioshack and tell them what you're looking for, they should be able to help you find one that'll do what you want.
03-18-2003 | 11:51 PM
#8
Thread Starter
Senior Member
My Feedback: (2)
Joined: Feb 2003
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
From: staten island , NY
do they make these
yeah i want read out like that but with the "battery snap in" feature.
i can just solder the leads to a 1 cell battery tray from an old radio i got that takes 1 AA. i guess that would work, i was just looking for one already made.
i can just solder the leads to a 1 cell battery tray from an old radio i got that takes 1 AA. i guess that would work, i was just looking for one already made.
