Hey Eddie I will be ordering the tuned pipe for my truck (it will come tomorrow) but will this part also fit my truck : 02031A Polished Aluminium Manifold+Pad

yes it will but the header that comes with it is a good one also, its not a manifold like some of the older style hsp rc's

Ok But I did notice that the Polished Aluminium Manifold is a bit shorter than the one that comes with the truck.. but your saying that they are roughly the same though..

its a non restrictive header, the 02031a is a shorter one but i think with the gearing you want a little more torque, its just my opinion but i left the stock header on all my megap's and used the 02124 pipe on a few of them.

Ok I might still get it cos its only 6 bucks I think.. Oh something else how about coming out with a Metal drive gear (Spur gear) so we could replace the plastic one cos I would be first in line to buy some ..

we are working on that but the megap's gears are really good, we have no real problem with them, if meshed correctly you good with them. I like plastic because it keeps the shock off the diff gears.

I know that your right Eddie but I'm gonna fit a .21 in the truck later on so I'll need a metal gear for that extra power.. I see it that a 1:8 truck should have a .21 engine in it "LOL" so I'll need this parts to beef up my truck (I hope that you have them in stock)


mpo-01 Wheel Hex Set $13.00

mpo-02 C HUB , C HUB PIN $38.00

mpo-03 Knuckle Arm Set $33.00

mpo-04 Rear Hub Set $33.00

mpo-5 Shock Stay Mount $29.00

mpo-10 Brake Post $6.50

mpo-11 Steering Rod $13.00

mpo-13 Slipper System $6.50

mpo-14 (903-004) Aluminum Shock -2PCS $24.00

mpo-15 (002124) Aluminum Exhaust Pipe $22.50

02031A Polished Aluminium Manifold+Pad

lol, no problem bro, all in stock, i am also getting a shipment of sh.21 engines in too, should have this week!!!!

That's great eddie. How much is the sh.21 though??

should go for 89.99

Ok thats a good price but will I need a differenet engine mount to fit it into the MXT-2S...

Since the .21 is a big block you will probably have to redrill the chassis and you could use the original mounts, i put a .26ss in a mamba and i had to change the mounting holes in the chassis, we also have adjustable motor mounts that may work good too. You will have to use a different flywheel, clutch shoes and a clutch nut, when you are ready, i will give you a list of stuff you will need, i have all that you will need to do it.

Thanks Eddie Could you do the list for me today if you can cos I'm going to do this project right away, so I'll get those parts first and a spare chassie just in case I screw up redrilling the holes LOL..

lol, i dont have the engines yet, should have them in a day or 2.

I mean the engine mounts and the clutch stuff..

i will work on the list today bro , worst case, i will get it to you tomorrow.

Hey bro,

you will need the following:

81020: http://server.sohouniverse.net/~himo...&=SID#MOREINFO

81203: http://server.sohouniverse.net/~himo...&=SID#MOREINFO

you could use the stock pipe but you will find it better with a 1/8 pipe: http://server.sohouniverse.net/~himo...&=SID#MOREINFO

i am pretty sure you should be able to use the stock motor mounts, you will just have to drill the chassis, you could try these: http://server.sohouniverse.net/~himo...&=SID#MOREINFO

Thanks Eddie your are the main guy and YYYYEEEE HAAAA my truck came WOW I didn't know it was THAT BIG LOL and The quality is perfect maybe I could use my wife as target practice with this huge truck...

lol, now be nice, lol. Make sure to give it a good once over with the screws, do a good break in and take some pics and video's!!!!! most of all, have a good time with it.

I'm not sure if I'm gonna run it in cos I got the urge the fit the bigger engine.. how many teeth are on the trucks clutch bell Eddie??

i am 99% sure its 17 tooth, run it bro, you will like it, its fast stock out of the box.

Ok I will do..