Pinion recommendation
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Rockland, ON, CANADA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Pinion recommendation
Hey Guys
I have a Sakura D4 RWD that I'm building and I Have a brushless 10.5T and wanted
a recommendation for a pinion gear to use with the 92 teeth spur gear.
Thanks
In advance
Dan
I have a Sakura D4 RWD that I'm building and I Have a brushless 10.5T and wanted
a recommendation for a pinion gear to use with the 92 teeth spur gear.
Thanks
In advance
Dan
#2
My Feedback: (1)
I am not sure about this but don't they come in pairs? If one gets bigger the other gets smaller. The diff. case has a certain spacing so the two gears must fit each other. If they do not match they will run in a bind and wear out very fast. They also will create increased drag on one another and you will have a performance loss.
I am speaking from a real car point of view. Ring and pinion gears are always a matched set. I believe it has to be the same for the RC Cars.
I am speaking from a real car point of view. Ring and pinion gears are always a matched set. I believe it has to be the same for the RC Cars.