POST A PIC Of YOUR DRIFT CHASSIS THREAD
04-30-2007 | 10:34 PM
#1
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth_W.A. , AUSTRALIA
POST A PIC Of YOUR DRIFT CHASSIS THREAD
Well since we have a drift body pic thread, I thought I'd start a Drift chasis pic thread so people can show off their blinged out chasis. So here goes to start with I'll post a pic of my faithfull TT01 thats had the usual upgrades done to it (most available from RCmart and eTamiya) 
So lets see your chasis guys. Maybe mention any rare or unusual hopups or mods you've done and links to them to help fellow drifters out.
So lets see your chasis guys. Maybe mention any rare or unusual hopups or mods you've done and links to them to help fellow drifters out.
05-02-2007 | 03:36 AM
#5
Senior Member
Joined: Jun 2006
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
From: toronto,
ON, CANADA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
That looks crazy Mugenx,
Are those foam side protecters, i need those for my XXX-S, so the batts don't fall out and so i can show off!
Are those foam side protecters, i need those for my XXX-S, so the batts don't fall out and so i can show off!
05-02-2007 | 08:22 PM
#8
Senior Member
Joined: Dec 2006
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
From: forked river, NJ
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
i myself just got a few electric chassis im building for drifting. got oen done and waiting to start the other. one thats done isnt the fastest thing but drifts nicely with good control. few pics
top 2 pics are the done chasis, graphite hpi (not sure which chassis it is), bottom 2 are my carbon hpi chassis (also unknown)
top 2 pics are the done chasis, graphite hpi (not sure which chassis it is), bottom 2 are my carbon hpi chassis (also unknown)
05-02-2007 | 08:32 PM
#9
Senior Member
Joined: Apr 2005
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
From: , QC, CANADA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
these are my two drift chassis i moded my tt01 more put a dont have any new pic and my ta05 is getting a new look this summer
05-02-2007 | 11:16 PM
#10
Senior Member
Joined: Feb 2007
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
From: , ON, CANADA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Hey firestarter, where in toronto do you live? You can hang out with our toronto drift team xD More info: http://z3.invisionfree.com/rcdrift/i...pic=14639&st=0
05-03-2007 | 06:20 AM
#11
Senior Member
Joined: Jun 2006
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
From: toronto,
ON, CANADA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
I live in Oakville!,
Its a new area, But im willing to travel( and bring some of my friendz) to drift anywhere within a 1 hr. range!
Its a new area, But im willing to travel( and bring some of my friendz) to drift anywhere within a 1 hr. range!
06-20-2007 | 02:19 AM
#16
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth_W.A. , AUSTRALIA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Here's my Stealth TA03F as I like to call it. Only just finished rebuilding it from second hand parts that I scored off various people around the world and it looks like I have enough parts to build another 
06-20-2007 | 04:11 AM
#18
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth_W.A. , AUSTRALIA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Ahhh yes the dampers Those are the limited edition golds that came with the TA03F Pro David Jun Edition. Their pretty rare I'm told. They've been completely rebuilt with new o-rings and pistons and then filled with 20aw oil
It was alot of work restoring this thing but to me its all worth it because I just LOVE the feel of the 03F with the front mounted motor. They just drift so well because of the weight placement I guess thats why HPI have released the E10 with a front motor mounting position
Those are the limited edition golds that came with the TA03F Pro David Jun Edition. Their pretty rare I'm told. They've been completely rebuilt with new o-rings and pistons and then filled with 20aw oil It was alot of work restoring this thing but to me its all worth it because I just LOVE the feel of the 03F with the front mounted motor. They just drift so well because of the weight placement
I guess thats why HPI have released the E10 with a front motor mounting position
06-21-2007 | 09:26 AM
#20
Member
Joined: Jun 2007
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
From: , AUSTRALIA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Well my drifter looks pretty basic to all the others in this thread and it truly is a drift pig.
Chassis: TT-01d
Motor: Venom fireball 13 t
ESC: Moped 9t limit (Brothers leftovers)
Receiver: Futaba
Servo: Futaba
Other mods: Aluminum dampers modified to fit. (from the old gv models nitro VY Commodore), Aluminum drive shaft,$10 set of wheels and some ABS from out da back
Chassis: TT-01d
Motor: Venom fireball 13 t
ESC: Moped 9t limit (Brothers leftovers)
Receiver: Futaba
Servo: Futaba
Other mods: Aluminum dampers modified to fit. (from the old gv models nitro VY Commodore), Aluminum drive shaft,$10 set of wheels and some ABS from out da back
06-21-2007 | 12:25 PM
#21
Senior Member
Joined: May 2007
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
From: Avondale,
AZ
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
yes, I have been after some Yok Bombers edition w/ the gold for awhile... Ive also ordered 2 TA03Fs to give this front motor drifting a try. Great job on the resto by the way...
06-21-2007 | 05:57 PM
#22
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth_W.A. , AUSTRALIA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Thanks The cleaning and restoring of the parts took most of the time. I ended up with enough parts to start piecing together another Pro and I still have some carbon plates for a 3rd. You ordered 2 03F's? Are they Pro's or plain 03F's? Its the pro you want. They are much lighter and the balance is WAY better. You must have had some luck finding 2 TA03Fs coz they arent that easy to find these days. did ya find em on eBay or something ?
If they arent Pro's then I might be able to help you out with the FRP chasis plates to convert the standard to a Pro If you want more info on the 03Fs then come over to the DRCentral Tamiya/TA03 forum where all us 03F ****s hangout Lots of help and info there.
The cleaning and restoring of the parts took most of the time. I ended up with enough parts to start piecing together another Pro and I still have some carbon plates for a 3rd. You ordered 2 03F's? Are they Pro's or plain 03F's? Its the pro you want. They are much lighter and the balance is WAY better. You must have had some luck finding 2 TA03Fs coz they arent that easy to find these days. did ya find em on eBay or something ?If they arent Pro's then I might be able to help you out with the FRP chasis plates to convert the standard to a Pro
If you want more info on the 03Fs then come over to the DRCentral Tamiya/TA03 forum where all us 03F ****s hangout Lots of help and info there.
06-22-2007 | 01:37 AM
#24
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Perth_W.A. , AUSTRALIA
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
Yup you sure can and I even know of 2 stores locally here that still have the TA03F-S in stock but then no one wants the R (motor mounted at the back like any other chasis) or the S (short chasis version which limits the shells you can run). Its the full size TA03F or more to the point the TA03F Pro thats hard to get (apart from them sometimes popping up on eBay).
06-23-2007 | 01:42 PM
#25
Junior Member
Joined: May 2007
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
From: Centerville,
OH
RE: POST A PIC Of YOUR DRIFT CHASSIS THREAD
This is my Cyclone. HPI rims with custom made ABS tires. First ones, I think they turned out pretty good. ESC is on the way, can't wait!!!
