i have a 4wd tamiya rx-7 drift car
i am a beginner and have no experience what so ever
i need help
i cant get my car to get sideways
i can get it to slide A BIT
buit thats it
can anyone give me tips on how to get this car sideways

What Surface are you driving on ??

For Drift it must be smooth as a babies Bum.. (or as smooth as possible)

What Battery pack are you using... for Drifting I recommend any Battery rated above 3000mah..

ummm....im using a super sport 1500 batery pack
ummm..ive tried it on a parking lot and it just wont slide

um what motor is in there and how long that pack lasting you?

umm...about 10-15 min.
and im ganna buy a new moter soon
a 20t

hmm alright i dunno if you got cash get a sprint2 but if not keep lookin here.

The Carpark surface may be too rough.. or the Tamiya Drift Tyres are too grippy.. a Change to either A polypipe tyre or a HPI drift tyre may be needed...

like what type of HPI tyre

i hear the type T is a good drift tire

hpi type is a good tire. abs is good for starters.

ya cuz i got tamiya type d

type ds are like freakin drag tires. waaaaaaaaaaaaaay to grippy lol

hey SHADOWnyc1993,

got the same chassis but not the body...change the tires, i was playing with my stock tires and didn't have much fun with it...just wont slide.
go to home depot and buy yourself an ABS pipe(black in color[$6], pvc is white), i also bought a pipe cutter at SEARS and after a bit of tuning, your car will drift like there's no tomorrow
just make sure to sand the edges of the pipe to round.
btw, im using the tamiya stock motor and esc...

what should i change them 2
type t
and im thinking about getin a 19t motor

[link=http://www.rcuniverse.com/forum/m_6327870/anchors_6327870/mpage_1/key_/anchor/tm.htm#6327870]http://www.rcuniverse.com/forum/m_6327870/anchors_6327870/mpage_1/key_/anchor/tm.htm#6327870[/link]