Emaxx with brushless RUNTIME
#1
Member
Thread Starter
Join Date: Jan 2008
Location: , UNITED KINGDOM
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Emaxx with brushless RUNTIME
Hey guys, just ran my emaxx with novak HV 4.5 system in, runs great, using 2x 5000Mah 7.4V lipos in series, getting around a 10 min run time only, not hammering it only at 80% throttle like 20% of the time, can anyone say why and what run times i should be getting?
Thanks,
Dan.
Thanks,
Dan.
#3
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Emaxx with brushless RUNTIME
My maxx with 4.5 hv gets about 15 minutes minutes from some 4000 mah batts , and I run 100% throttle over half the time. It is bashing at race speeds most of the time. If I were to use 4S and 5000 mah I'd expect about 20+ minutes from my low geared light e-maxx.
#4
Member
Thread Starter
Join Date: Jan 2008
Location: , UNITED KINGDOM
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
RE: Emaxx with brushless RUNTIME
Tried it again today and seems like the batteries are now "coming to life" got much longer run time around 23 mins so next run should be the best
thanks,
Dan.
thanks,
Dan.