I hate to ask for help in an area that has been covered, so I read many postings, and still no luck.
I am trying to get a futaba skysport 4 to work with fms, and I'm not getting anywhere. I have the cable to the printer port, so I don't know if it's a com port issue or what. I'm running ME, have the crystal out, there is no red button on controller, only the trainer button, there are no other buttons on controller except for the server reverser set. Any help or direction would be greatly appreciated.

You might not want to hear this, but you might try the FMS forums [link=http://n.ethz.ch/student/mmoeller/fms/index_e.html]here[/link] to get some help with your problem.

Sorry I can't anything else,

I checked out the site. After looking for awhile I found a post with the exact same setup/problem, there was a guy on there that has a website that covers it all, 15 minutes later it's working! Thanks.