Best for thermalling..HF 3.2 DG600 or HF 3.0 ASW28?
#1
Member
Thread Starter
My Feedback: (2)
Join Date: Dec 2003
Location: Aledo,
TX
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Best for thermalling..HF 3.2 DG600 or HF 3.0 ASW28?
I have tried to narrow down the selection of my first scale ship; HF Modell 3.2 DG 600 or the HF ASW 28 3.0 meter. Texas flat-land thermals will be the source of lift. Jeff B
#2
Senior Member
My Feedback: (1)
Join Date: Jun 2002
Location: Winter Haven,
FL
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Best for thermalling..HF 3.2 DG600 or HF 3.0 ASW28?
Hi Jeff
Both planes u listed are high performance planes. Never than less the ASH has flaps and will give u the posibility to change the wing profile by droping down the flaps and airlerons about 1 to 3 degrees. This setting will give u a better performance when flying slow in a thermo.
The DG is a exelent plane but it needs spedd to perform really well and I would not recomend as a first scale ship.
I would go with the ASH. But If u really want a scale thermo sniffer I would go with a KA6 or a ASK 18 both are niche looking planes and both have treiffic thermaling cababilities.
Saludos
Landi
Both planes u listed are high performance planes. Never than less the ASH has flaps and will give u the posibility to change the wing profile by droping down the flaps and airlerons about 1 to 3 degrees. This setting will give u a better performance when flying slow in a thermo.
The DG is a exelent plane but it needs spedd to perform really well and I would not recomend as a first scale ship.
I would go with the ASH. But If u really want a scale thermo sniffer I would go with a KA6 or a ASK 18 both are niche looking planes and both have treiffic thermaling cababilities.
Saludos
Landi
#3
My Feedback: (22)
Join Date: Jan 2004
Location: AddisonMaine
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best for thermalling..HF 3.2 DG600 or HF 3.0 ASW28?
Jeff
The LET 5.533mDG-1000 thermals very well and is one of the best made RTF scale planes.
At 2500' still nicely visable.
[link=http://www.scalesoaring.net/EMM/M%20dg1000/pages/dggaggle.htm]View Image[/link] Here
You can check them out [link=http://www.scalesoaring.net/EMM/asw.htm]Here[/link]
The LET 5.533mDG-1000 thermals very well and is one of the best made RTF scale planes.
At 2500' still nicely visable.
[link=http://www.scalesoaring.net/EMM/M%20dg1000/pages/dggaggle.htm]View Image[/link] Here
You can check them out [link=http://www.scalesoaring.net/EMM/asw.htm]Here[/link]