LiteMachines LMH 100+
#1
Senior Member
Thread Starter
My Feedback: (5)
Join Date: Jan 2002
Location: Montgomery,
AL
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
LiteMachines LMH 100+
I'm an experienced RC airplane flyer...no experience with Helis
I have a friend with a Litemachines 100+ with a Norvel .060 engine for sale.
I have experience with Norvel, on airplanes.
This seems like an inexpensive way to get into Helis...can fly in my yard, etc.
Will these things fly OK for an experienced RCer wih no Heli experience?
I have a friend with a Litemachines 100+ with a Norvel .060 engine for sale.
I have experience with Norvel, on airplanes.
This seems like an inexpensive way to get into Helis...can fly in my yard, etc.
Will these things fly OK for an experienced RCer wih no Heli experience?
#2
Senior Member
Join Date: Oct 2003
Location: Mosinee,
WI
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
RE: LiteMachines LMH 100+
I would say yes. I had both a Norvel powered LMH and an electric Corona. I had problems with my Norvel powered LMH overheating but from talking to the factory guys at the hobby show in Chicago it doesn't sound like the problem is typical. Mine may have had a bad engine.
From the little time I was able to fly it before it overheated, I realized it was a very stable machine. Much like the Corona I got later. Someone with experience in R/C should have no trouble flying it. And, you won't find a tougher helicopter anywhere.
Regards,
Mike
From the little time I was able to fly it before it overheated, I realized it was a very stable machine. Much like the Corona I got later. Someone with experience in R/C should have no trouble flying it. And, you won't find a tougher helicopter anywhere.
Regards,
Mike