Mixer Board
12-28-2004, 09:32 PM
#2
Senior Member
Join Date: Oct 2003
Location: Mosinee,
WI
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mixer Board
A mixer board is used on electric heli's that have separate motors for the main and tail rotors. It combines the functions of the Electronic Speed Controls (ESC), gyro, and tail rotor mixing, sometimes the receiver. You can do the same thing with "separates", meaning separate ESC's, gyro, and receiver. If you have a TX capable of heli functions you can use the Revo Mixing function for the tail rotor. If not you'll need to use a Heading Hold (HH) gyro.
