Walkera 40 6 CH Radio Remote Control Helicopter RC
#1
Member
Thread Starter
Join Date: Apr 2005
Location: skel, UNITED KINGDOM
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Walkera 40 6 CH Radio Remote Control Helicopter RC
Walkera 40 6 CH Radio Remote Control Helicopter RC
ive just picked one of these up for £100 from a did i get a good deal or have i been ripped its my first heli any advice would be great
http://store.hobby-estore.com/walker...elicopter.html
ive just picked one of these up for £100 from a did i get a good deal or have i been ripped its my first heli any advice would be great
http://store.hobby-estore.com/walker...elicopter.html
#2
Junior Member
Join Date: May 2005
Location: , IA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: Walkera 40 6 CH Radio Remote Control Helicopter RC
Here is how my Walkera arrived out of the box:
[link=http://www.iowaoutdoors.org/~justin/helibad/]http://www.iowaoutdoors.org/~justin/helibad/[/link]
[link=http://www.iowaoutdoors.org/~justin/helibad/]http://www.iowaoutdoors.org/~justin/helibad/[/link]
#3
Member
Thread Starter
Join Date: Apr 2005
Location: skel, UNITED KINGDOM
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
RE: Walkera 40 6 CH Radio Remote Control Helicopter RC
...............what have i got myself into[] i got it on ebay and have just paid coming from JAPAN hopefully it will get here ok but now im worried
the seller said it is brand new.............
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5979342576 this is it
the seller said it is brand new.............
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5979342576 this is it
#4
Junior Member
Join Date: Jun 2005
Location: , UNITED KINGDOM
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Walkera 40 6 CH Radio Remote Control Helicopter RC
Hi All,
I have just got received Walkera 22A from RC-Experts, I'm new to this and thought it would be a great hobby, mistake!!!!! First off, no connections to the receiver, second no pin in the T-Assembly (hence no spin), third no screws on the servo to hold the control arms.
What I need to no.
1: where to connect the servos and the gyro to the receiver and what way from the looking at the front?
2: what’s the best way to secure the rotor blades, there is a steel pin at the bottom end but can’t find any sort of replacement?
3: Think I could find screws to secure the 4 servo arms
4: Should have sent the dam thing back, but hey that take the fun out of it.
Anyway hope you can help get me off the ground
I have just got received Walkera 22A from RC-Experts, I'm new to this and thought it would be a great hobby, mistake!!!!! First off, no connections to the receiver, second no pin in the T-Assembly (hence no spin), third no screws on the servo to hold the control arms.
What I need to no.
1: where to connect the servos and the gyro to the receiver and what way from the looking at the front?
2: what’s the best way to secure the rotor blades, there is a steel pin at the bottom end but can’t find any sort of replacement?
3: Think I could find screws to secure the 4 servo arms
4: Should have sent the dam thing back, but hey that take the fun out of it.
Anyway hope you can help get me off the ground
#5
Junior Member
Join Date: May 2005
Location: , IA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: Walkera 40 6 CH Radio Remote Control Helicopter RC
ORIGINAL: krazor
...............what have i got myself into[] i got it on ebay and have just paid coming from JAPAN hopefully it will get here ok but now im worried
the seller said it is brand new.............
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5979342576 this is it
...............what have i got myself into[] i got it on ebay and have just paid coming from JAPAN hopefully it will get here ok but now im worried
the seller said it is brand new.............
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5979342576 this is it
I did it the same way, ebay, drop shipped from Hong Hong.
Lots of people get theirs in 'ok' condition.
Good Luck!