Hello guys,

I tried flying my T-rex inside my garage but unfortunately I'm getting tail wags off of it. I tried adjusting gyro gain but to no avail. Can someone please help me with my problem. Thanks in advance.

Hello, There are a few other things to look at if the sensativity settings don't fix a tail wag. Look at the slider on the tail shaft, sometimes the tolerances are so tight it binds up and doesn't have a smooth operation. The ball links on the tail holders if they are really tight it too can cause the tail to wag. I always start with tail mechanical operations first, then look at adjusting the TX and gyro settings. hope that helps. Note: It can be hard to diagnose if the slider is binding on the tail shaft really look it over and the ball links and make sure it's really smooth. starcop

Thanks starcop, I'll do that tomorrow after work.