Hirobo GPH 346 information needed
#1
Thread Starter
Senior Member
My Feedback: (1)
Joined: Aug 2004
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgeport,
AL
Does anyone know where I can get any good information on the Hirobo GPH? I just purchased one and I have only been able to find a small amount of information on it.
Also does anyone have any comments or suggestions on this heli?
Thanks
Also does anyone have any comments or suggestions on this heli?
Thanks
#3
Senior Member
Joined: Oct 2002
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
From: Winchester,
VA
I almost bought 1. The deal actually fell through after I took delivery of the heli. Anyway I found info not real easy to come by and parts even harder to find. It looked like a very nice heli though. I'm sorry to say that I have since deleted all the info I had collected, but it did all come from RCU so a search may bring up some of the threads I had started. This was about 2 years ago, BTW.
#4
Senior Member
Joined: Oct 2002
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
From: Winchester,
VA
Check out this thread I started for some info:
http://www.rcuniverse.com/forum/m_73.../tm.htm#735227
There is more in this forum if you search on "GPH".
Good luck.
http://www.rcuniverse.com/forum/m_73.../tm.htm#735227
There is more in this forum if you search on "GPH".
Good luck.
#5
Thread Starter
Senior Member
My Feedback: (1)
Joined: Aug 2004
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
From: Bridgeport,
AL
Thanks for the information guys. I bought one used from a friend of mine. The price was worth it for the electronics and the engine if nothing else. If has a short life, these will go into the next one. Unless the damage is very minor, I probably will not fix it.
I have seen it fly and it does very well. I have not tried it yet myself as I am still trying to learn to fly my Raptor 50 and can't find enough time for that.
I have seen it fly and it does very well. I have not tried it yet myself as I am still trying to learn to fly my Raptor 50 and can't find enough time for that.



