F-18F multi angle video
#27
Thread Starter

Once again, thank you guys. I'll try your suggestions and use only one sound track and add some pictures at the beginning of the video.
I'll certainly come back here with more of these.
I'll also try some other camera positions like below the nose facing to the rear or at the back of the plane facing to the rear...
I'll certainly come back here with more of these.
I'll also try some other camera positions like below the nose facing to the rear or at the back of the plane facing to the rear...
#28
Thread Starter

ORIGINAL: SDCrashmaster
Wanted to add that I really liked the hydraulic lines you've added to the gear. Really enhanced the feel of the underbelly shots in your vid Oli.
ORIGINAL: olnico
Oh yes Paul. I wish I had a great shooter with me!!!!
But I have not found any one in Dubai.
And I fly alone most of the time. So this is one great way of having at least something left from these flight.
I 100% agree with you. It would be super nice to have sequences taken from the outside in the video.
ORIGINAL: SDCrashmaster
Very cool Oli. Did you use the solid back, or open back?
A great shooter on the ground with solid equipment would be a nice addition to these awesome camera angles.
Nice work,
Paul
Very cool Oli. Did you use the solid back, or open back?
A great shooter on the ground with solid equipment would be a nice addition to these awesome camera angles.
Nice work,
Paul
But I have not found any one in Dubai.
And I fly alone most of the time. So this is one great way of having at least something left from these flight.
I 100% agree with you. It would be super nice to have sequences taken from the outside in the video.
That scale gear gave me a lot of work. I am still working on the nose strut though...
http://www.rcuniverse.com/forum/m_10...m.htm#10857011
#29
Thread Starter

ORIGINAL: Peter Coers
Nice video
. my PC is alright, quad core etc
.
It is something I also want to do with the B during testing. But first I have to build one
.
Peter
Nice video
. my PC is alright, quad core etc
.It is something I also want to do with the B during testing. But first I have to build one
.Peter
It's really interesting to see the behaviour of the full flying elevator and gear doors/struts.
#30
Thread Starter

ORIGINAL: sieze2
That has to be one of the best rc turbine video's I have seen! Awesome work. I bet it took ages to edit, so credit where credit is due.
That has to be one of the best rc turbine video's I have seen! Awesome work. I bet it took ages to edit, so credit where credit is due.
Putting only one camera sound track there should not be a big problem.
#31
Thread Starter

ORIGINAL: hyrumflyer84
Fantastic job on the video! I loved the dust being kicked up by the wheels on landing. It kinda looked like a full scale smokin the tires when it sets down.
Fantastic job on the video! I loved the dust being kicked up by the wheels on landing. It kinda looked like a full scale smokin the tires when it sets down.
#33
Thread Starter

Oh I can see that you still have some work to do on this one, Rex.
The tricky part is to get a scale looking landing gear. Lots of work involved.
The tricky part is to get a scale looking landing gear. Lots of work involved.



