DL Cyclone control throws? help
#1
Thread Starter
Member
Joined: Jan 2002
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
From: Park land,
FL
Hi all,
I have a DL cyclone, the first one, not the 3, and i was wondering what you guys are using for control throws on it? I have one witht the sport wing, and no flaps, i assume i will be using flaparons. And if you can give me the throws in inches that would be great too,
Thanks,
Nate
I have a DL cyclone, the first one, not the 3, and i was wondering what you guys are using for control throws on it? I have one witht the sport wing, and no flaps, i assume i will be using flaparons. And if you can give me the throws in inches that would be great too,
Thanks,
Nate
#2
Senior Member
My Feedback: (5)
Joined: Jan 2002
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
From: Lakeville , MN,
I think your best bet is to check with Yves at DL. I do have a Cyclone I , but I dont remember the throws. When I built mine, I asked Yves and did what he said. It flies fine at the recommended rates and is not pariticularly touchy or sensitive.
#3
Senior Member
My Feedback: (31)
Joined: Dec 2001
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
From: Lake Worth,
FL
from the manual:
Aileron 1/2" up and down
Elevator 7/16" up and down
Rudder 1/2" left and right
Measurement take from outer edges of moving surfaces
You will need to use flaperons for landing to slow it down
Aileron 1/2" up and down
Elevator 7/16" up and down
Rudder 1/2" left and right
Measurement take from outer edges of moving surfaces
You will need to use flaperons for landing to slow it down



