Startbox Display
07-08-2002 | 02:04 AM
#2
My Feedback: (4)
Joined: Dec 2001
Posts: 2,341
Likes: 0
Received 0 Likes
on
0 Posts
From: Longwood ,
FL
Start box display
I had the same problem once, and there is a simple fix.
If you open the startbox, you will find a small blue colored LCD Contrast potentiometer on one of the circuit boards. It is the only pot in the startbox.
Plug in the startbox, turn the transmitter and receiver on as if you were going to start the engine, and adjust the pot to get the desired display contrast/intensity.
Button the box back up, and you are all done.
This is covered in the owners manual, I believe.
Harley Condra
BVM REP
RAM REP
If you open the startbox, you will find a small blue colored LCD Contrast potentiometer on one of the circuit boards. It is the only pot in the startbox.
Plug in the startbox, turn the transmitter and receiver on as if you were going to start the engine, and adjust the pot to get the desired display contrast/intensity.
Button the box back up, and you are all done.
This is covered in the owners manual, I believe.
Harley Condra
BVM REP
RAM REP
07-08-2002 | 03:08 AM
#3
Thread Starter
Senior Member
My Feedback: (16)
Joined: Jan 2002
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
From: San Angelo, TX
start box
I know what you are talking about, I just did not want to touch anything until I was sure the pot was for the display,
Thanks Harley
Thanks Harley
07-09-2002 | 08:11 PM
#5
Senior Member
Joined: Jan 2002
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: North Texas
Startbox Display
Thanks for the info, Harley. I thought the weak readout was just something I had to put up with. It seems to diminish as the receiver battery discharges, true?
Johnny
Johnny
